Search

Defines certain notions used for the geometric description of an aircraft for the purpose of flight dynamic studies. Does not give all the definitions that permit the detailed description of the shape of the aircraft. The aircraft is considered to be made up of various components. Defines general characteristics, overall dimensions of the aircraft, ground limit angles, fuselage, aerodynamic…

Defines three positions of the modular floor plane as reference plane for vertical modular dimensions in building design and gives rules for the position of the floor in relation to this plane. Applies to the construction of buildings of all types designed in accordance with the principles and rules of modular coordination as laid down in ISO 2848.

Describes methods of measuring the magnetic properties of cores of magnetic oxides. These properties are in terms of inductance L and quality factor Q of a specified coil, cores being defined by geometrical configuration and relative position. Applies to cores up to 45 mm in length and up to 8.5 mm in diameter at frequencies up to 100 MHz.

Defines a method for incorporating more than one source of control into a CAMAC crate through auxiliary controllers located in normal stations in the crate. An auxiliary controller bus (ACB) and priority arbitration protocol are fully defined.

Defines the electrical and mechanical characteristics of equipment which will provide for interchangeability of recording. The requirements given are related to 525 line-60 field and/or for 625 line-50 field systems. Applies to magnetic video recording and/or reproduction using 25.4 mm (1 in) tape on type C helical video tape recorders suitable for broadcast applications.

Applies to transverse track recorders, i.e. recorders making use of four video heads rotating in a plane perpendicular to the direction of tape motion. Defines the electrical and mechanical characteristics of equipment which will provide for interchangeability of recordings. This standard is in accordance with ITU-R specifications, unless otherwise specified.

Describes the concept of maintainability, defines the general approach and gives the objectives of maintainability. Gives the maintainability requirements for specifications and contracts and describes the contents of maintainability programmes. Sections 1 and 3 are replaced by IEC 60300-3-10 (2000).

Applies to directly heated positive temperature coefficient thermistors, insulated or non-insulated, having a resistance temperature characteristic which approximates to a step-function. Typically they are made of ferro-electric semi-conductive materials. Specifies the conditions for approval, acceptance and continuous quality control. Defines the terminology for the thermistors covered by this…

Defines the general principles and the technical details of the measurement of the magnetic properties of magnetic sheets, at power frequencies, by means of a single sheet tester. This tester is applicable to flat plate specimens obtained from magnetic sheets and strips of any quality. The magnetic characterictics are determined for a sinusoidal induced voltage, for specified peak values of…

Defines the methods of inspection, the pressure and leak tests and performance tasks for valves with pressure ratings up to PN 100 (Class 600).