Defines the type H and type Z; dimensions are illustrated by figures; tabulates gauge dimensions from No. 0 up to and including No. 4; includes a method of penetration gauging for both types.
Nuclear power plants — Guidelines to ensure quality of collected data on reliability
The output of a data collection system is strongly dependent on the quality of the information collected. Before starting such a system, it is necessary to clearly define the following items: the overall goal, the suppliers of field data, the users of processed data, the terms and expressions used, the means used to collect data and to treat them, the questions to be answered by field data, field…
Defines only the requirements and characteristics of test benches. Applies to test benches suitable for calibration of fuel injection equipment for compression ignition engines requiring fuel delivery up to 300 mm^3/injection/cylinder at full load. Some figures show diagrams as well as a test record sheet (figure 7), an analysis sheet (figure 8), and a field test sheet (figure 9).
1. Scope
1.1 This Standard covers mineral fibre insulations supplied in the form of
batts, blankets, boards, sheets with or without membranes, and loose fill used
in building envelopes.
1.2 This Standard defines the types and specifies the methods for determination
of thermal resistance, dimensions, and coverage values stated by the
manufacturer.
1.3 This Standard does not apply to…
These requirements cover classification, rating, and
extinguishing performance of fire extinguishers intended for use
in attacking Class A, B and D fires, and fires in Class C
situations, as defined herein. These requirements also cover
classification and performance during fire tests of agents for
application to Class D fires. The ultimate classification and
rating of an extinguisher or…
Hydraulic fluid power — Pumps, motors and integral transmissions — Parameter definitions and letter ...
Describes and systematically defines the principal technical characteristics, and allots letter symbols to these characteristics, and indicates how they can be more clearly defined by suffixes corresponding to particulate cases. Lists also an analysis of parameter dimensions. Gives examples for the use of symbols with suffix, and includes definition of terms without symbols.
Aluminium, magnesium and their alloys — Temper designations
The temper designations define the sequence of basic treatments used to produce the tempers. Mechanical properties apply to individual alloy-temper-product combinataions. The temper designation consists of letters and follows the designation of the alloy, and is separated therefrom by a dash.
Applies to rolling bearings, other than tapered roller bearings. The term airframe is defined. Both metric and inch series bearings are included because of established usage in the aircraft industry. The bearings included in ISO 1002 are usually full complement bearings with basically cylindrical bore and outside surface and are sealed or shielded.
Plastics — Film and sheeting — Determination of tear resistance — Part 1: Trouser tear method
Specifies a method of determing the tear resistance of plastic film or sheet less than 1 mm thick, tested under defined conditions. A rectangular test specimen having a longitudinal slit extending over its half length is subjected to a tensile test on the "trouser legs" formed by the slit. The average force required to tear the specimen completely along its length is used to calculate…
Information processing - Coding of machine readable characters (MICR and OCR)
Defines the coded representation of printed characters recognized by reading equipment. Includes the fonts E 13 B; CMC 7; OCR-A; OCR-B. Assigns bit-patterns to characters recognized by reading equipment. This information is then given to the recipient by different media and can be used by printing devices. Single-font reader and multiple-font reader are considered as applications. References: ISO…