Lifting appliances — Controls — Layout and characteristics — Part 5: Overhead travelling cranes and ...
Establishes the arrangement, requirements and direction of movement of the basic controls for travelling, traversing, slewing, cab driving, lifting, hoisting and lowering operations for these cranes as defined in ISO 4306-1.
Numerical control of machines — NC processor input — Basic part program reference language
Defines a higher-level symbolic part-programming language which is processed by a digital computer to produce a NC machine program. Annex A gives rules for representing the RL on punched cards; annex B contains syntax description on the reference language; a list of recommended synonyms is given in annex C; annex D includes an alphabetical list of major words and locations.
Acoustics — Statistical methods for determining and verifying stated noise emission values of machin...
Defines terms relating to the procedures. Applies both to machines which are produced in very small quantities as well as to machines which are produced by mass production methods.
Building construction — Procedures for setting out, measurement and surveying — Vocabulary and guida...
Defines terms, in English and French, that are commonly used in procedures for setting out, measurement and surveying in building construction. Gives also equivalent German terms in an annex. Contains general terms, quality of measurement, scales, measuring tools, measuring instruments and their parts, and methods of measuring.
Technical drawings — Fundamental tolerancing principle
Specifies the principle of the relationship between dimensional tolerances and geometrical tolerances. It shall be applied to linear dimensions and their tolerances, angular dimensions and their tolerances and geometrical tolerances which define the following four aspects for each feature of the part: size form, orientation, and location. Refers to ISO 286/1, ISO 1101, and ISO 2692.
Steel products for pressure purposes — Derivation and verification of elevated temperature propertie...
Defines an alternative to the method specified in ISO 2605-1 and ISO 2605-2. Does not define a verification procedure; where verification of elevated temperature properties is required this shall be by hot testing.
Inductor and transformer cores for telecommunications. Part 3: Sectional specification: Magnetic oxi...
Lists the characteristics, ratings and also the inspection requirements for magnetic oxide cores of assessed quality forming a substantially closed magnetic circuit intended for broad-band transformers for professional and industrial applications, excluding power and tuned transformers. Defines the appropriate methods of test to be used in detail specifications derived from this specification, in…
The dimensions specified are close to average dimensions of current production in most manufactering countries. The types of beakers are specified: a low-form beaker with spout an a tall-form beaker with spout. The nominal capacities, the material and the construction are described. The basic dimensions are tabulated and the incriptions are defined.
Grooved vertical joints with connecting bars and concrete infill between large reinforced concrete p...
Specifies a laboratory mechanical method of test for the determination of the relationship between tangential loading and relative displacement for certain types of vertical joints between large reinforced concrete panels subjected to tangential loading. Is applicable to vertical joints between large wall-panels satisfying certain conditions defined in the standard.
Explosion protection systems — Part 4: Determination of efficacy of explosion suppression systems
Gives a method for evaluating the effectiveness against defined explosions in an enclosed volume. Gives the criteria for alternative test apparatus used to undertake tests and criteria to be applied in defining the safe operating regime.
