Textile machinery and accessories — Pitches of knitting machine needles
Specifies the pitches of needles for knitting machines. Defines needle pitch (distance between the centres of two adjacent needles in the same needle carrier, in millimetres) and gauge (number of needle pitches per 25.4 mm). The needle pitch may be used as a basis for assessment of fabrics knitted on these machines.
Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium...
Specification of the procedure of pipe sample extraction with carbondioxide water in three steps of extraction. The quantities of cadmium and mercury in the water extracts shall be determined, but the analytical methods for these determinations are not defined.
Hydraulic fluid power — Filters — Statement of requirements
A statement of requirements (SOR) is defined as a document to be provided by a user to specify his requirements to a manufacturer. A model SOR is described to enable a user to define his requirements fully, without ambiguity and in standard form so that the supplier can meet the requirements as accurate as possible. Annex A contains a standard form for a SOR, annex B shows clearances.
Specifies a procedure for approximating a volume of a typical material carried in the bowl of an elevating scraper. The volumes are based on the inside dimensions of the bowl and a representative volume on top of the bowl. The method is intended to provide a consistent means of comparing capacities; it is not intended to define actual capacities that might be observed in any specific application.
Earth-moving machinery — Zones of comfort and reach for controls
Defines zones of comfort and reach for controls derived from the overlapping reach capability of large and small operators in the seated position. Is intended as a guide for the design of the operator compartment controls for earth-moving machinery. Cancels and replaces the first edition (ISO 6682 : 1980), of which it constitutes a minor revision.
Testing Procedures for Seismic Qualification of CANDU Nuclear Power Plants
1. Scope
1.1 This Standard defines the consideration and requirements for performing an acceptable seismic qualification test and presents the different test methods that may be used.
Note: Selected safety related systems are required to be seismically qualified. (See CSA Standard CAN3-N289.1.) Qualification may be by analysis or testing, or a combination thereof, depending on the nature…
Commercially dry virgin cork, ramassage, gleanings, corkwood refuse and corkwaste — Definitions and ...
Applies to material defined in ISO 633 the moisture content of which is not higher than 14 % as determined in accordance with ISO 2386. Gross mass of bales is the size of commercially dry cork including packaging. The type of cork and the name of the exporting country shall be indicated on the bales.
Textile machinery — Cloth rollers — Terminology and main dimensions
Defines the basic terms, lays down the main dimensions and gives specifications of cloth rollers used for winding fabrics and feeding subsequent machines. Specifies the designation of cloth rollers and gives an example for designation. - Replaces the first edition (ISO 6177-1983), clause 3.2 of which has been technically revised.
Presentation of reliability, maintainability and availability predictions
Defines the items that should be considered for the presentation of information regarding predictions of quantitative characteristics of reliability, maintainability and availability of systems and equipment, including hardware, software and human elements. Provides the writer of a prediction report with a complete listing of all items to be considered in making a proper and full presentation of…
