Specifies the minimum clear space to be provided beneath the aircraft main jacking points. Is not intended to define fully all jack clearance deminsions. In situations where clearances are critical, it should be used as a design aid only. Final critical clearances should be established by using actual jack dimensions.
Information processing — Magnetic disk for data storage devices — 158 000 flux transitions per track...
Lays down the mechanical, physical and magnetic characteristics for a lubricated magnetic disk of 210 mm (8.3 in) outer diameter and 100 mm (3.9) inner diameter intended for data storage devices. Defines requirements for a disk to enable satisfactory performance at 158 368 flux transitions per track. Other densities may necessitate modified characteristics.
Information processing - Magnetic disk for data storage devices - 83 000 flux transitions per track,...
Specifies mechanical, physical and magnetic characteristics of a lubricated disk of 130 mm (5,12 in) outer diameter and 40 mm (1,57 in) inner diameter to be mounted on data storage devices. Defines requirements for proper performance at 83 332 flux transition per track.
Information processing - Magnetic disk for data storage devices - 158 000 flux transitions per track...
Lays down the mechanical, physical and magnetic characteristics for a lubricated magnetic disk of 210 mm (8.3 in) outer diameter and 100 mm (3.9) inner diameter intended for data storage devices. Defines requirements for a disk to enable satisfactory performance at 158 368 flux transitions per track. Other densities may necessitate modified characteristics.
Defines sizes for components of kitchen equipment in dwellings. Specifies also, in annex A, the sizes of zones for hot and cold water and waste and gas pipes in kitchen cabinets and certain appliances. Applies to all components of kitchen equipment, for example cabinets, work-tops, sink units and appliances.
Welding and allied processes — Assemblies made with soft solders and brazing filler metals — Mechani...
Defines the principles and the technique of the tests designed to determine the conventional mechanical characteristics of assemblies produced with soft solders and brazing filler metals. Specifies also a method of interpreting the results obtained. Applies to joining materials and their fluxes which are used for soldering and brazing of ferrous and non-ferrous metals and alloys.
Textiles — Method for assessing the appearance of seams in durable press products after domestic was...
Seamed fabric specimens are subjected to procedures simulating domestic laundering practices. One of the washing and drying procedures specified in ISO 6330 shall be used. The specimens are compared visually with photographic standards under defined illumination.
Road vehicles — Diagnostic testing of electronic systems
Defines diagnostic provisions applicable to electronic systems in road vehicles. Applies to electronic systems including electronic modules, associated input sensors, output actuators and indicators. The measurement ranges specified exclude certain devices for which specific test equipment is required. Does not apply to those systems which have built-in diagnostic capabilities and do not require…
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modifie...
Describes the characteristics of 130 mm (5.25 in) flexible disk cartridges recorded at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides using modified frequency modulation recording. Defines the quality of the recorded signals, the track layout (track format A) to be used on such a flexible disk cartridge intended for data exchange between data processing systems. Applicable in conjunction with ISO…
Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modifie...
Describes the characteristics of 130 mm (5.25 in) flexible disk cartridges recorded at 7 958 ftprad, 1,9 tpmm (48 tpi), on both sides using modified frequency modulation recording. Defines the quality of the recorded signals, the track layout (track format A) to be used on such a flexible disk cartridge intended for data exchange between data processing systems. Applicable in conjunction with ISO…
