1. Scope
1.1 This Standard provides a testing procedure for defining a minimum level of structural adequacy and performance capability for running gear used under trailers, sectional homes, and mobile homes, but excludes trailers equipped with full air brakes or vehicles not required to be licensed for highway use.
1.2 This Standard covers general requirements and performance tests…
Magnetic materials. Part 8: Specifications for individual materials. Section Three: Specification fo...
Defines the grades of cold-rolled magnetic non-oriented non-alloyed steel strip delivered in the semi-processed condition, that is without final heat treatment, of 0.50 mm and 0.65 mm nominal thickness. Specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure.
Magnetic materials. Part 8: Specifications for individual materials. Section Two: Specification for ...
Defines the grades of cold-rolled magnetic non-oriented alloyed steel strip delivered in the semi-processed condition, that is without final heat treatment, of 0.47 mm, 0.50 mm and 0.65 mm nominal thickness. It specifies general requirements, the magnetic properties, the geometric characteristics and tolerances, technological characteristics as well as the inspection procedure.
Rubber- or plastics-covered rollers — Specifications — Part 3: Dimensional tolerances
Specifies classes of dimensional tolerances and test methods for the measurement of dimensions. Defines covered rollers as cylindrical cores, generally of metal, with a cover of rubber or plastics for particular use. They are manufactured in a wide variety of sizes and hardness grades depending on the intended use. - Part 1 and 2 of this standard deal with the requirements for hardness, and the…
Asbestos-cement ventilation ducts and fittings — Dimensions and characteristics
Applies to asbestos-cement straight ducts and their fittings used for ventilation purposes, with cross-sections up to 300 mm. Specifies also methods for checking the dimensions and defining the principal characteristics and acceptance tests applicable to these products.
Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheomete...
Specification of a method for determining the apparent viscosity, at high shear, of polyvinylchloride pastes prepared from polyvinylchloride polymers and plasticizers. It applies in particular to "standard pastes" according ISO 4612. Placing of a sample in a Severs rheometer and setting of the jacket to a defined temperature. Measurement of the flow rate of the paste through a…
Air cargo equipment — Unit load devices transport vehicle (UTV) — Functional requirements
Specifies minimum requirements for type 3, class A, air cargo unit load device chassis in accordance with the terminology defined in ISO 7715. Outlines the requirements for a transport vehicle, capable of carrying unit load devices over airport and public roads and transferring them to/from rollerized handling equipment.
Rubber latex — Determination of coagulum content (sieve residue)
Specifies a method for the determination of coagulum content (sieve residue) of natural rubber latex concentrates containing preservative agents and also for the determination of the coagulum content (sieve residue) of synthetic rubber latices. Coagulum is defined as the material comprising pieces of coagulated rubber, latex skin and coarse foreign matter, retained unter the conditions of the…
Lifting appliances — Classification — Part 2: Mobile cranes
Establishes a classification of mobile cranes and related crane mechanisms based on the number of operating cycles to be carried out during the expected life and on a load spectrum factor which represents a nominal state of loading. Applies to basic types of self-propelled mobile cranes and their parts as defined in ISO 4306-2.
