Aerospace — Self-locking nuts with maximum operating temperature greater than 425 degrees C — Procur...
Defines the requirements for metric nuts, with MJ thread. Applies to these nuts, provided that reference is made to this International Standard in the relevant definition document. Includes definitions, describes certification and quality assurance, technical requirements and test methods, qualification and acceptance tests, loads and torques to be applied, classification of visual and…
Information processing systems - Data communication - Multilink procedures
Defines multilink procedures where multiple parallel data links at the data link layer are used to provide a variable bandwidth data link between network layer entities. Does not specify the way in which single data link protocol functions indicate to multilink procedures that the transmission of a multilink frame has been successful.
Information processing systems — Data communication — Multilink procedures
Defines multilink procedures where multiple parallel data links at the data link layer are used to provide a variable bandwidth data link between network layer entities. Does not specify the way in which single data link protocol functions indicate to multilink procedures that the transmission of a multilink frame has been successful.
Hot-rolled structural steel wide flats — Tolerances on dimensions and shape
Specifies tolerances on the dimensions, shape and mass of wide flats of non-alloyed and alloyed steels (excluding stainless steels). Applies to wide flats, as defined in clause 3, of steels with a specified minimum yield strength equal to or less than 700 N/mm .
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modifie...
Defines the dimensional, physical and magnetic characteristics of the cartridge so as to provide physical interchangeability between data processing systems. Provides for full data interchange between data processing systems and provides an alternative method of full data interchange between data processing systems. To be used in compliance with ISO 646; ISO 2022; ISO 4873; ISO 6429; ISO 7665;…
Information processing - Data interchange on 130 mm (5.25 in) flexible disk cartridges using modifie...
Applies, as part 3 of ISO 8630, to track format B for 80 tracks. Defines the quality of recorded signals, the track layout, and a track format to be used on 130 mm (5,25 in ), 13262 ftprad flexible disk cartridges designed for data interchange between data processing system. Provides, together with ISO 8630-1, for full data interchange between data processing systems. To be used in compliance…
Fire protection — Fire extinguishing media — Powder
Specifies requirements for the chemical and physical properties and for minimum performance in defined test methods of extinguishing powders suitable for use against fires of classes A, B and C. Requirements are also given for information and data to be declared by the manufacturer.
Petroleum products and lubricants — Petroleum lubricating oils for turbines (categories ISO-L-TSA an...
Specifies required characteristics of mineral oils as delivered that are primarily intended for use as lubricants and control fluids for steam turbine systems requiring oils of category TSA and that may be used for gas turbines using oils of category TGA and for water turbines. These oils are not intended for service when extreme pressure properties are required. Two types of oil are defined:…
Information processing — Data interchange on 130 mm (5.25 in) flexible disk cartridges using modifie...
Defines the dimensional, physical and magnetic characteristics of the cartridge so as to provide physical interchangeability between data processing systems. Provides for full data interchange between data processing systems and provides an alternative method of full data interchange between data processing systems . To be used in compliance with ISO 646; ISO 2022; ISO 4873; ISO 6429; ISO 7665;…
