Search

Establishes a vokabulary in English, French, and Russian with alphabetical indexes. The series consists of the parts 1 to 9. The terms an definitions are listed in a table which includes illustrations. In some illustrations, the component is highlighted to aid identification. ISO 2710 gives a classification of engines and defines basis terms of such engines, their working and charakteristics.

Specifies the characteristcs and quality assurance requirements for bolts with normal heads. Applies to bolts as defined provided that reference is made to this International Standard in the product standard or definition document. Gives definitions and technical requirements and test methods as well as information on qualification testing and a classification of defects.

Specifies the characteristics and quality assurance requirements for bolts with normal heads. Applies to bolts as defined, provided that reference is made to this International Standard in the product standard or definition document. Gives definitions, technical requirements and test methods, qualification and acceptance values for tension fatigue test, classification of defects, sampling plans…

This National Standard of Canada is equivalent to International Standard ISO 8326:1987. 1 Scope and Field of Application This International Standard defines in an abstract way the externally visible service provided by the OSI Session Layer in terms of (a) the primitive actions and events of the service; (b) the parameter data associated with each primitive action and event; (…

Defines interoperability and security related requirements for using encipherment at the physical layer of the ISO Open Systems Interconnection (OSI) Reference Model in telecommunication systems conveying Automatic Data Processing (ADP) information. Facilitates interoperation of data encipherment equipment. Applicable mainly to various encipherment algorithms. Annex B provides additional…

Specifies maximum and minimum dimensions for these clamps installed by means of a bolt with a nominal diameter of 5 mm. The specified dimensions define a dimensional envelope. Shall not be considered as an interchangeability standard. The tolerances for each type of clamp are to be defined in the parts standards drawings.

Defines the method as an interim method because the reproducibility between various laboratories is still too different. The crushing strength of individual pellets can affect the dispersion of carbon black in polymers, on bulk handling, and on conveying properties.

Applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as 'equipment' and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V a.c. or 1 500 V d.c. It states those general rules and requirements which are common to low-voltage equipment as defined in Subclause 1.1, including for example:…

This standard is intended to define the grades of grain-oriented magnetic sheet steel in nominal thicknesses of 0.27 mm, 0.30 mm and 0.35 mm. In particular, it gives general requirements, magnetic properties, geometric characteristics and tolerances and technological characteristics, as well as inspection procedures.

Presents fundamental properties, quantities for characterization and a classification of environmental conditions dependent on precipitation and wind, relevant for electrotechnical products. Defines the characteristics of precipitation and wind as background for the severities to which products are liable to be exposed during transportation, storage and use.