Search

This National Standard of Canada is equivalent to International Standard ISO 8648-1988. 1 Scope and Field of Application This International Standard provides an architectural model of the OSI Network Layer as a framework for OSI Network Layer standardization, allowing incorporation of existing networks within the OSI architecture. This framework encourages the design of real subnetworks…

Applies to film integrated circuits and to hybrid film integrated circuits both passive and active. Applies also to partly-completed F and HFICs supplied to customers for subsequent processing as well as to chip carrier circuits having more than one chip, provided that they have been interconnected by film interconnection techniques. This specification defines the quality assessment procedures…

The method consists in passaging of the material through a rotating sample divider and collecting of the fractions, followed by rejection or recombination of some of the fractions. By choosing suitable equipment it is applicable to any mass above a minimum defined by size and number of particles.

Establishes the values of the minimum practical coefficients of utilization for ropes and rotation-resistant ropes used on mobile cranes. Applies to all mobile cranes as defined in ISO 4306-2.

Specification of a method for the determination of the tendency of plasticisers to migrate from plastics into other materials or other plastics, when they are brought into close contact. A test specimen cut from a sheet or plate of the material to be tested is placed in close contact with two sheets capable of absorbing plasticisers. It is then subjected to heating under defined conditions. The…

Specifies the operational requirements, construction, calibration, and maintenance of rotating element devices for the measurement of flow velocities in open channels. Does not define the form of the signal produced by the equipment or the signal receiving equipment. Cancels and replaces the second edition (ISO 2537 : 1985), of which it constitutes a technical revision.

1. Scope and Field of Application This Standard is an Application Layer Standard within the Open Systems Interconnection framework defined by CSA Standard CAN/CSA-Z243.100. This Standard defines the services for interlibrary loan. These services are provided by the use of the ILL protocol in conjunction with supporting telecommunications services. This Standard does not specify…

1. Introduction This document provides a protocol specification for Interlibrary Loan (ILL) communication. The purpose of the ILL protocol is to allow the parties involved in an ILL transaction to progress through the transaction in an orderly and prescribed way. The ILL protocol is defined as being within the Application Layer (Layer 7) of the OSI Reference Model (CAN/CSA-Z243.100-86…

Defines in English and French 135 terms of structure, operating conditions, dimensions and geometry of the rollers, surface characteristics of plane and grooved rollers and balance. Alphabetical indices in English and French.

Gives requirements for properties of phenolic cellulose paper copper-clad laminated sheet, of defined flammability, in thicknesses of 0.5 mm up to 3.2 mm. The sheet consists of an insulating base (phenolic resin bonded cellulose paper laminate with defined flame resistance) with metal foil bonded on one or both sides.