Requirements for Class 1C, 2C, and 3C Pressure-Retaining Components and
Supports in CANDU Nuclear ...
Applies to pressure retaining components of CANDU nuclear power
plants that have a Code Classification of Class 1C, 2C, or 3C as
defined by CSA Standard CAN3-N285.0.
Technical drawings — Geometrical tolerancing — Maximum material principle
Constitutes a technical revision of ISO 1101-2. Defines and describes the maximum material principle which is indicated on drawings by the symbol (M) and facilitates manufacture without disturbing the free assembly of parts in case of mutual dependence of size and geometry. Figures are intended only as illustrations for understanding the maximum material principle.
Preparation of steel substrates before application of paints and related products — Visual assessmen...
Identifies four levels of mill scale and rust that are commonly found on surfaces of uncoated steel. It also identifies certain degrees of visual cleanliness after surface preparation of uncoated steel surfaces and of steel surfaces after total removal of any previous coating. Are defined by written descriptions together with photographic examples. Is equivalent to Swedish Standard SS 05 59 00 (…
Petroleum and liquid petroleum products — Calculation of oil quantities — Part 2: Dynamic measuremen...
Defines the various terms employed in the calculation of metered petroleum quantities. Also specifies the equations which allow the values of correction factors to be computed. Also gives rules for the sequence, rounding and significant figures to be employed in a calculation. Provides tables which may be used to look up specific correction factors should it not be desired to calculate them by…
Defines terms used to describe building joints, their constituent parts and their design in building construction. Cancels and replaces the first edition (ISO 2444-1974), of which it constitutes a minor revision.
Cellular rubbers and plastics — Determination of dynamic cushioning performance
Defines a method measuring the peak deceleration of a mass when it is dropped on a test piece. The test described is intended primarily for quality assurance; however, an annex contains notes to be considered if the test is used to obtain design data. Two figures show typical arrangements.
Information Processing Systems - Data Communication - High-Level Data Link
Control Procedures - De...
This National Standard of Canada is equivalent to International Standard ISo
7776-1986.
1. Scope and field of application
This International Standard defines an application of the following HDLc
Standards: ISO 3309, ISO 4335, ISO 7478, and ISO 7809. When there is
difficulty in the interpretation of a reworded requirements from one of the
other International Standards, the original…
Information Processing Systems - Data Communication - Multilink Procedures
This National Standard of Canada is equivalent to International Standard ISO 7478-1987.
1 Scope and Field of Application
This International Standard specifies multilink procedures where a multiplicity of parallel data links at the data link layer are used to provide a variable bandwidth data link between network layer entities. The multilink procedures (MLP) exist as a new upper sublayer…
Information Processing Systems - Data Communication - High-Level Data Link
Control Procedures - Fr...
This National Standard of Canada is equivalent to International Standard ISo
3309-1984.
1. Scope and field of application
This International Standard specifies the frame structure for data
communication systems using bit-oriented high-level data link control (HDLC)
procedures. It defines the relative positions of the various components of the
basic frame and the bit combination for the…
