Search

1. Scope CAN/CSA-C22.2 No. 231.0-M89 - Electrical and Electronic Measuring and Test Equipment 1.1.1 This Standard applies to electrical, electronic, or electromechanical equipment designed to (a) measure or observe, and indicate quantities of (i) electrical, or (ii) electronic phenomena; or (b) supply (i) electrical, or (ii) electronic quantities for measuring or…

Defines terms relating to vihicles as habitations, used for occasional occupation. Includes also definitions of some terms that affect vehicles as whole for some purposes of road use. The infomative annex A contains the bibliography. It gives the terms and definitions in English and French and finally these terms are repeated in alphabetical indexes.

Covers fibre building boards as defined in ISO 818, particle boards as defined in ISO 820, as well as plywood as defined in ISO 2074. The principle involves the determination, by weighing, of the loss in mass of a test piece between its state at the time of sampling and its state after drying to constant mass, and the calculation of this loss in mass after drying.

Specifies methods for the calculation of the operating power requirements on the driving pulley of a belt conveyor, and of the tensile forces exerted on the belt. Applies to belt conveyors with carrying idlers. Lays down the definitions, symbols and units etc. and defines the resistances to motion of belt conveyor, the driving force and power requirements and the capacity and cross-section of a…

Is complementary to ISO 2859. Object of the methods laid down is to ensure that lots of an acceptable quality have a high probability of acceptance and that the probability of rejection of inferior lots is as high as possible. To be used under the following conditions: inspection procedure to be applied to a continuous series of lots of discrete products supplied by one producer using one…

This National Standard of Canada is equivalent to International Standard ISO 8807:1989. 1 Scope and Field of Application This International Standard defines the syntax and semantics of the Formal Description Technique LOTOS. LOTOS is in general used for the formal description of distributed, concurrent information processing systems. In particular LOTOS can be used to describe formally the…

This part defines graphical symbols for sequencers and gives some rules concerning their use in circuit diagrams. Symbols given in this part shall be used for all documents and circuit diagrams concerning sequencers for data processing. Specifies two types of symbols for sequence function modules: type "input/output" (see annex A), and type "step/return" (see annex B).

Defines general terms, in English and French, applicable to building and civil engineering works. Comprises a) fundamental concepts which may be the starting point for other, more specific, definitions; b) more specific concepts used in several areas in building and that may be used commonly in standards, regulations and contracts.

Is concerned with the expression of procedure-oriented algorithms. Defines: 1 - the nature of program constructs; 2 - the manner in which constructs can be combined; 3 - specifications for a set of constructs; a variety of subsets of the defined constructs.

Is concerned with the expression of procedure-oriented algorithms. Defines: 1 - the nature of program constructs; 2 - the manner in which constructs can be combined; 3 - specifications for a set of constructs; a variety of subsets of the defined constructs.