Search

This part specifies the preparation, use and colour reactions of Herzberg stain. It should be used in conjunction with ISO 9184-1 and, if necessary, with other staining tests defined in ISO 9184-2. The Herzberg staining test is applicable to the qualitative and quantitative differentiation between chemical, mechanical and rag pulps. The stain also permits the qualitative identification of semi-…

This part specifies the preparation, use and colour reactions of Graff "C" stain. It should be used in conjunction with ISO 9184-1 and, if necessary, with other staining tests defined in ISO 9184-2. Graff "C" stain allows the identification of almost all the common papermaking fibres. However, this calls for a great deal of training and experience. Thus, main applications are…

This part specifies the preparation, use and colour reactions of Lofton-Merritt stain. It should be used in conjunction with ISO 9184-1 and, if necessary, with other staining tests defined in ISO 9184-2. The Lofton-Merritt staining test is applicable to the qualitative and quantitative differentiation of unbleached and bleached softwood chemical pulps, unbleached kraft and sulfite in softwood…

Describes conditions under which adhesive joints may be exposed to various climatic or chemical influences for the purpose of assessing the effects of such influences on certain properties. They are not necessarily applicable to the determination of the service life of a bonded assembly. The principle consists in defining the ageing conditions that relate most closely to the application for the…

Designed for received batches. The choice of sampling plan and the extent of sampling depends on the knowledge of the product acquired by the customer. Specifies two methods and includes tables with acceptance and rejection criteria based on a given number of acceptable quality levels (AQLs). Defines the inspection by qualitative characteristics (attributes) and the inspection by measurements (…

Defines terms used in the environmental testing of electrotechnical products such as components, sub-assemblies, assemblies and equipments. The environmental conditions include shock and vibration, climatic (temperature, humidity and air pressure), sealing (against ingress of solids, liquids and gases or to maintain a pressure difference), soldering heat (including thermal shock from soldering).

This National Standard of Canada is based on International Standard IEC 601-1:1988. NOTE - Amendment 2:1998 to this document was reaffirmed November 10, 2006. It applies to the safety of MEDICAL ELECTRICAL EQUIPMENT (as defined in Sub-Clause 2.2.15) designed to be installed and used in accordance with the rules of the Canadian Electrical Code, Part I. Although this Standard is primarily…

This National Standard of Canada is based on International Standard IEC 601-2-4:1983. 1 Scope This Particular Standard specifies requirements for the safety of CARDIAC DEFIBRILLATORS and CARDIAC DEFIBRILLATOR-MONITORS as defined in Sub-clauses 2.1.101 and 2.1.102, hereinafter referred to as EQUIPMENT, incorporating a capacitive energy storage device and which are designed to be installed…

Includes four methods: iron(III) sulfate - sulfuric acid test, copper - copper-sulfate - sulfuric acid test, hydrochloric acid test and nitric acid test. ISO 9400 defines the term nickel-based alloy. Specifies apparatus, test specimens, procedure and evaluation.

Deals with the assessment of the performance of non-broadcast video tape recorders of the so-called colour-under type for domestic use. Defines test signals, measurement set-ups and measurement conditions so as to make possible the comparison of the results of measurements.