Information Technology - Telecommunications and Information Exchange Between
Systems - Protocol Com...
This National Standard of Canada is equivalent to International Standard ISO/IEC 8880-3:1990.
1.1 Scope
This part of ISO/IEC 8880 describes the provision and support of the
Connectionless-mode Network Service defined in ISO 8348. The field of
application of ISO/IEC 8880-2 is the environments defined in 1.5.
Earth-moving machinery — Symbols for operator controls and other displays — Part 1: Common symbols
Gives 140 symbols which are presented with 32 % of original size and defines the various colours to be used. This first edition cancels and replaces ISO 6405:1982.
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for op...
Gives 65 symbols which are presented with 32 % of original size and defines the various colours to be used. This second edition cancels and replaces the first edition (1982). Annex A is for information only.
Alpine ski-bindings — Lateral release under impact loading — Test method
Defines an impact test for establishing the maximum impulse for retention of a test ski on the test sole in the lateral direction. Specifies 17 terms and definitions. Annex A is for information only.
Building construction — Measuring instruments — Procedures for determining accuracy in use — Part 6:...
Specifies test procedures used to evaluate the precision in use of laser instruments and ancillary equipment for measurements of distances from a plane, a line or a specific gradient defined by a laser beam. Does not apply to land surveying purposes.
Sequential sampling plans for inspection by variables for percent nonconforming (known standard devi...
Applies if all of the following conditions are satisfied: a) inspected are continuing series of lots of discrete items supplied by one producer from one production process; b) only a single quality characteristic x is taken into consideration; c) production is stable and x has a known standard deviation; d) an upper or lower limit (or both) is defined.
Acoustics — Test code for the measurement of airborne noise emitted by power lawn mowers, lawn tract...
Specifies methods for measuring the sound pressure levels at prescribed microphone positions in the proximity of the machine under test. Defines acoustical requirements for measurements. Annex A is for information only.
Agricultural tractors — Test procedures — Part 8: Engine air cleaner
Defines the measurement accuracy. Describes the preparation and test procedure, and the results to be recorded. Annex A (test report) forms an integral part of this standard.
Banking — Procedures for message encipherment (wholesale) — Part 1: General principles
Gives terms and definitions. Defines procedures in order to protect financial messages exchanged through any communications architecture. Annex A forms an integral part of this standard. Annexes B, C and D are for information only.
Digital audio tape recorder reel to reel system, using 6,3 mmmagnetic tape, for professional use - P...
Applies to stereophonic digital audio recording on 6,3 mm wide tape with stationary heads for professional use. Defines the mechanical and electrical characteristics necessary to ensure the interchangeability of programme recorded digital audio signal on magnetic tape amongst professional industries.
