Technical drawings — Tolerancing of orientation and location — Projected tolerance zone
Defines the method of tolerancing by indication of a projected tolerance zone and specifies the method of indication. Annex A gives examples of indication on drawings, interpretation and functional length.
Information technology — Telecommunications and information exchange between systems — Intermediate ...
Specifies procedures for the transmission of configuration and routeing information between network entities, the encoding of the protocol data units used for the transmission of the configuration and routeing information, procedures for the correct interpretation of protocol control information, and the functional requirements for implementations claiming conformance to this standard. Procedures…
Cinematography — Printed 8 mm Type S image area on 35 mm motion-picture film perforated 8 mm Type S,...
The dimensions which define the image area are established from the row of perforations discarded after slitting. This row contains a wider perforation and is customarily used for lateral resgistration of the image. Annex A describes the use of a registration device for prints made with a step printer.
Information technology - Telecommunications and information exchange between systems - Intermediate ...
Specifies procedures for the transmission of configuration and routeing information between network entities, the encoding of the protocol data units used for the transmission of the configuration and routeing information, procedures for the correct interpretation of protocol control information, and the functional requirements for implementations claiming conformance to this standard. Procedures…
Commentary to CSA Standard CAN/CSA-S472-92, Foundations
This Commentary applies to the design of foundations for fixed offshore
structures. The term "foundation" is defined as the seabed, any fill, and any
artificial elements (eg, piles or skirts) that penetrate or rest upon these
materials and that in whole or in part support production structures and
facilities. The Standard is divided into subsections that address
(a) site…
Connectors for optical fibres and cables - Part 10: Sectional specification - Fibre optic connector ...
Defines the requirements for type BFOC/2,5 connector sets. Type BFOC/2,5 is a sub-family of single position optical connector sets. They are characterized by a bayonet coupling mechanism and a cylindrical ferrule of 2,5 mm typical diameter. The sub-family includes plug-adapter-plug and plug-socket configurations. The contents of the corrigendum of May 1996 have been included in this copy.
Application of the Canada Standard System for the Sizing of Women's Wearing
Apparel
1.1 This standard presents a modification of the complete Canada Standard
sizing system described in CAN/CGSB-49.201. More specifically, the control
body dimensions trunk length and crotch height have been replaced by the size
indicator dimensions back-waist length and waist height, respectively, to make
the system conform more closely to present trade practice.
1.2 Sizes are defined in terms…
Liquid flow measurement in open channels — Sampling and analysis of gravel-bed material
Applies to surface and subsurface material having diameters of 2 mm and over. Two sampling techniques are applicable: one is to collect a definable in situ volume of material which is subsequently dealt with as a bulk sample, the second is to sample material from the surface, using one of several procedures.
