Search

1.1 General Except as provided for in Clause 1.1.2, this Standard applies to the design, construction, installation, operation, and inspection of every refrigerating system, as provided for by the Act and defined in this Code. 1.1.2 This Standard does not apply to the use of water or air as a refrigerant, nor to bulk-storage gas tanks that are not permanently connected to a…

Applies to the digital audio tape (DAT) cassette system that records and/or plays back digital information such as PCM encoded audio and/or other data. Defines the parameters that affect the compatibility between cassettes and the associated tape recorders. It is also intended as a reference for manufacturers producing cassettes and/or tape recorders which are to conform with the system described…

This guide defines methods of test for evaluating the properties of interlaminar insulation coatings applied to magnetic steel sheet and strip in the range of temperatures from ambient to 800 °C as a basis for a type test.

Defines the geometry of the interface of couplings for fluid systems in aircrafts. Specifies the dimensions which allow the interchangeability of the male and female elements and of the nut used for the connection. The dimensions define the maximum volume of the male fitting.

The language defined is different from those of previous PL/I standards, although substantially upward compatible, at the source program and semantic level. The differences are summarized in appendix A. Specifies the syntax and semantics of conforming PL/I programs. Defines a conforming processor (or conforming implementation) only in terms of those conforming programs. The definition is…

The language defined is different from those of previous PL/I standards, although substantially upward compatible, at the source program and semantic level. The differences are summarized in appendix A. Specifies the syntax and semantics of conforming PL/I programs. Defines a conforming processor (or conforming implementation) only in terms of those conforming programs. The definition is…

The method specified determines the percentage mass of moulding material that is transferred through two apertures in the punch of a disc mould during a moulding process carried out under defined conditions. It is intended only for production control and should not be used as part of a mandatory material specification.

Specifies the coating thickness requirements and the gold fineness of the coating. Also defines current terms (in English, French, German) concerning gold alloy coatings. Does not apply to watch bracelets if they are permanently attached to the case.

Specifies methods of setting a chassis dynamometer for test purposes, e.g. for fuel consumption tests or exhaust emission measurements. Measurements are based on either the coastdown or the torquemeter method. Gives detailed instructions on the measurement of relevant parameters during data collection, on the analysis techniques for the reduction and correction of these data to the reference…

Defines the managed object classes, attribute types, name bindings, packages, specific attributes, action types, parameter types and notification types documented in accordance with CCITT Rev. X.722 / ISO/IEC 10165-4 and specifies compliance requirements placed on other CCITT Recommendations / International Standards that make use of these definitions. Is applicable to the development of OSI…