Search

This National Standard of Canada is based on International Standard CEI/IEC 730-2-4:1990 (first edition). Amendment 1:2001 reaffirmed 2006-02-10. Amendment 2:2002 reaffirmed 2007-03-28. 1. Scope This clause of Part 1 is replaced by the following: 1.1 This standard applies to the partial evaluation of thermal motor protectors as defined in IEC Publication 730-1 for sealed (hermetic and…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-5:1990 (first edition). 1. Scope This clause of Part 1 is replaced as follows: 1.1 This standard applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles for household and similar use including heating, air conditioning and…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-6:1991 (first edition). 1 Scope This clause of Part 1 is replaced as follows: 1.1 This standard applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment for household…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-7:1990 (first edition). Amendment 1:2001 reaffirmed 2006-02-10. 1 Scope This clause of Part 1 is replaced as follows: 1.1 In general, this standard applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a…

1 Scope This clause of Part 1 is replaced as follows: 1.1 This Part 2 applies to automatic electrical temperature sensing controls for use in, on or in association with equipment for household and similar use, including electrical controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-10:1991 (first edition). Amendment 1:2001 reaffirmed 2006-02-10. 1 Scope This clause of Part 1 is replaced as follows: 1.1 This part of International Standard IEC 730 applies to controls for automatically controlling the starting windings of single phase motors associated with equipment for household and…

This National Standard of Canada is based on International Standard CEI/IEC 730-2-12:1993 (first edition). NOTE - Amendment 1 reaffirmed 2006-03-29. 1 Scope This clause of Part 1 is replaced as follows: 1.1 This Part of International Standard IEC 730 applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use.…

This National Standard of Canada is based on International Standard CEI/IEC 1029-2-1:1993. 1 Scope This clause of part 1 is applicable except as follows: 1.1 Modification: Replace the first paragraph by: This International Standard applies to transportable circular saws intended for cutting wood and similar materials with a blade diameter not exceeding 260 mm as defined in 2.101.

This National Standard of Canada is based on International Standard CEI/IEC 1029-2-2:1993. 1 Scope This clause of part 1 is applicable except as follows: 1.1 Modification: Replace the first paragraph by: This International Standard applies to transportable radial arm saws intended for cutting wood or similar materials with a blade diameter not exceeding 260 mm as defined in 2.101.

This National Standard of Canada is based on International Standard CEI/IEC 1029-2-4:1993. 1 Scope This clause of part 1 is applicable except as follows: 1.1 Modification: Replace the first paragraph by: This International Standard applies to transportable bench grinders with a wheel diameter not exceeding 200 mm and a peripheral speed not exceeding 50 m/s, as defined in 2.101.