1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for floor drains, adjustable floor drains, and area drains that are used inside of, or adjacent to, building structures. Drains of outlet NPS-2 and smaller, intended only for installation in shower areas, are covered in this Standard and in ASME A112.18.2/CSA B125.2 as well.
1.2 Exclusions
This Standard does…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for roof drains. This Standard applies to the following types of roof drains:
a)
general purpose;
b)
gutter and cornice;
c)
parapet and promenade;
d)
balcony; and
e)
deck.
1.2 Exclusions
This standard does not apply to siphonic roof drains covered under ASME A112.6.9/CSA B79.9.
1.3 Illustrations…
1 Scope
1.1 Inclusions
This Standard covers sanitary floor sinks and specifies requirements for materials, construction, inspection, testing, and marking.
Note: In this Standard, sanitary floor sinks are generally referred to as “floor sinks”.
1.2 Exclusions
This Standard does not include floor drains covered in ASME A112.6.3/CSA B79.3.
1.3 Terminology
In this Standard, “shall” is used to…
1 Scope
1.1 Inclusions
This Standard specifies design and performance requirements for trench drains, utility channels, and grate systems that are used inside of, or adjacent to, building structures that are typically non- residential.
Note: These channels are not typically subject to high-speed vehicles but can be subjected to concentrated heavy loads such as hard-wheeled forklifts.
1.2…
1 Scope
1.1 Inclusions
This Standard covers cleanouts, including floor and wall types, used in concealed piping in and adjacent to residential, commercial, industrial, institutional, and other buildings open to the public.
1.2 Illustrations
Figure 1 included in this Standard is intended only to describe and portray typical floor and wall type cleanouts and is not intended to restrict design…
1 Scope
1.1 Inclusions
This Standard specifies construction and marking requirements, as well as the performance criteria for the testing and rating of hydromechanical grease interceptors, rated by flow in litres per minute and gallons per minute.
1.2 Exclusions
This Standard does not apply to interceptors intended for rainwater, sanitary wastewater, or wastewater containing petroleum…
1 Scope
1.1 Inclusions
This Standard specifies material, design, construction and performance criteria for the testing and rating of grease interceptors equipped with automatic grease removal devices (GRD) and it applies to GRDs designed to automatically remove free-floating fats, oils, and grease (FOG) from sanitary discharges without intervention from the user except for maintenance.
1.2…
Automatic electrical controls — Part 2-5: Particular requirements for automatic electrical burner co...
Scope
Replacement:
This part of IEC 60730 applies to automatic electrical BURNER CONTROL SYSTEMS for the AUTOMATIC
CONTROL of burners for oil, gas, coal or other combustibles intended to be used
• for household and similar use,
• in shops, offices, hospitals, farms and commercial and industrial applications.
This International Standard is applicable
• to a complete BURNER CONTROL SYSTEM…
1 Scope
1.1
This Standard applies to non-conductive optical fiber cable and conductive optical fiber cable intended to be installed indoors in non-hazardous locations in accordance with CSA C22.1, Canadian Electrical Code, Part I.
This Standard provides performance requirements for products installed in accordance with Section 56 of the Canadian Electrical Code, Part I.
1.2
This Standard…
Soil quality — Determination of redox potential — Field method
This document specifies a field method for the determination of soil redox potential (Eh).
NOTE The electrochemical measurement of redox potential described in this document is possible only if the relevant soil horizon has a moisture status defined as fresh or wetter according to the classes presented in Annex D.
