Rubber and rubber additives — Determination of total sulfur content using an automatic analyser
This International Standard specifies an instrumental (automatic analyser) method for the determination of total sulfur
in rubber and rubber additives.
Rubber and rubber additives — Determination of total nitrogen content using an automatic analyser
This International Standard specifies an instrumental (automatic analyser) method for the determination of total
nitrogen in rubber and rubber additives.
Oilseed residues — Simultaneous determination of oil and water contents — Method using pulsed nuclea...
This International Standard specifies a rapid method using nuclear magnetic resonance (NMR) for the
determination of the oil and water contents of oilseed residues obtained after oil extraction by pressure or solvents
(excluding mixed products).
It is applicable to oilseed residues as flour, plates or agglomerates, provided that the particles are smaller than
2 mm and that the water content is…
Zinc sulfide concentrates — Determination of zinc content — Hydroxide precipitation and EDTA titrime...
This International Standard specifies a hydroxide precipitation and EDTA titrimetric method for the determination of
the zinc content of zinc ores and concentrates containing 10 % (m/m) to 60%(m/m) zinc.
Ambient air — Determination of carbon monoxide — Non-dispersive infrared spectrometric method
This International Standard specifies a non-dispersive infrared spectrometry method for the continuous analysis
and recording of the carbon monoxide (CO) content of the ambient air.
The method is applicable to the determination of carbon monoxide concentrations from 0,6 mg/m3 (0,5 ppm volume
fraction) to 115 mg/m3 (100 ppm volume fraction).
The method has a lower limit of detection of about 0,06…
Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented i...
This International Standard specifies methods for the determination of puncture-impact properties of rigid plastics in
the form of flat test specimens, such as discs or square pieces, under defined conditions. Specimens may be
moulded directly, cut from sheets or taken from finished products. Different types of test specimens and test
conditions are defined.
These falling-dart methods are used to…
Packaging — Complete, filled transport packages and unit loads — Stacking tests using a static load
This International Standard specifies three methods for carrying out a stacking test on a complete, filled transport
package, or on a unit load, using a static load. Whichever method is employed, the test may be used to assess the
performance of a package or a unit load, in terms of its strength or the protection that it offers to its contents when it
is subjected to stacking. It may be performed…
Packaging — Complete, filled transport packages and unit loads — Sinusoidal vibration tests using a ...
This International Standard specifies two methods for carrying out a sinusoidal vibration test on a complete, filled
transport package or unit load using a variable frequency. These tests may be used to assess the performance of a
package or an unit load in terms of its strength or the protection that it offers to its contents when it is subjected to
vertical vibration. Each may be performed…
Lead sulfide contentrates — Determination of lead content — EDTA titration method after acid digesti...
This International Standard specifies a lead sulfate precipitation EDTA titrimetric method after acid decomposition for
determination of the lead content of lead sulfide concentrates.
The method is applicable to lead sulfide concentrates having lead content in the range 50 % (m/m) to 80%(m/m). The
method is not applicable to lead concentrates containing more than 1 % (m/m) of barium.
Information Technology - Coding of Multimedia and Hypermedia Information - Part 1: MHEG Object Repre...
This National Standard of Canada is equivalent to International Standard ISO/IEC 13522-1:1997 (first edition, 1997-05-15).
1 Scope
This part of ISO/IEC 13522 specifies the coded representation of final-form multimedia and hypermedia information objects that are interchanged as units within or across services and applications, by any means of interchange (e.g. storage, local area network…
