Search

This document specifies a method for the determination of aflatoxin M1 content in milk and milk powder. The lowest level of validation is 0,08 µg/kg for whole milk powder, i.e. 0,008 µg/l for reconstituted liquid milk. The limit of detection (LOD) is 0,05 μg/kg for milk powder and 0,005 μg/kg for liquid milk. The limit of quantification (LOQ) is 0,1 μg/kg for milk powder and 0,01 μg/kg for liquid…

This document sets out the basic methods for sampling copper, lead, zinc and nickel concentrates from moving streams and stationary lots, including stopped-belt sampling, to provide samples for chemical analysis, physical testing and determination of moisture content, in accordance with the relevant International Standards. Where the concentrates are susceptible to significant oxidation or…

This document specifies methods for the determination of —    the presence of colourless chromate conversion coatings, —    the presence of hexavalent chromium in colourless and coloured coatings on zinc or cadmium or aluminium-zinc (mass fraction of aluminium: 55 %, within a range of 54 % to 56 % mass fraction) and zinc-aluminium (mass fraction of aluminium: 5 %) alloys, —    the total chromium…

This document specifies an oven-drying method for the determination of the dry matter content in suspensions of cellulosic nanomaterials. The procedure is applicable to cellulosic nanomaterial suspensions which do not contain any appreciable quantities of materials other than water that are volatile at the temperature of 105 °C ± 2 °C. It is used, for example, in the case of cellulosic…

This document specifies an oven-drying method for the determination of the dry matter content in paper, board, pulp and cellulosic nanomaterials in solid form, which all can be produced from virgin and /or recycled materials. It is also applicable to the determination of the dry matter content of paper and board for recycling. The procedure is applicable to paper, board, and pulp and cellulosic…

This document lists all the test conditions to be performed on a PT reader or a PT object in order to ensure that all the requirements specified in ISO/IEC TS 24192-1 are met for the PT device under test. This document applies to PT devices only: — PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on ISO/IEC 14443 (all parts); — PT…

This document lists all the test conditions to be performed on a PT reader or a PT object in order to ensure that all the requirements specified in ISO/IEC TS 24192-1 are met for the PT device under test. This document applies to PT devices only: —    PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on ISO/IEC 14443 (all parts); —    PT…

IEC 60364-7-710:2021 applies to electrical installations in medical locations so as to provide safety of patients and medical staff. These requirements refer to: – hospitals and clinics or equivalent institutions (including equivalent transportable and mobile locations); which, subject to assessment (710.30), can also include: – sanatoriums and health clinics; – dedicated locations in homes…

This document specifies the data element content and exchange format for tokens used in token-based health information sharing. It includes a) the data items that may be contained in a health information token (HI-TOKEN), b) the value representation for each data item, c) the exchange formats allowed for HI-TOKEN sharing (electronic, machine-readable symbol, print), and d) considerations when…

Scope Replacement: This document applies to the basic safety and essential performance of an EMS ventilator in combination with its accessories, hereafter also referred to as ME equipment: ? intended for patients who need differing levels of support from artificial ventilation including ventilator-dependent patients; ? intended to be operated by a healthcare professional operator; ? intended…