Stranded wire ropes for mine hoisting — Fibre components — Characteristics and tests
Specifies the nature and properties of the components together with the corresponding test methods. Describes the determination of water-soluble acids, the salt content, and the extractable content (dry matter and water content) as well as the expression of results.
Potassium chloride for industrial use — Determination of potassium content — Flame emission spectrop...
Is applicable to products having a minimum KCl content of about 95 % (m/m). The principle consists in dissolution of a test portion taken from the laboratory sample, previously ground and sifted. Acidification to pH 1 after suitable dilution, and atomization of the resultant solution in the burner of a flame spectrophotometer. Measurement of the intensity of the 766 nm ray, compared with the…
The method is applicable to alloys having zirconium contents between 0,1 and 1,0 % (m/m). However the method is not applicable completely to alloys having lead and/or bismuth (see annex). Rare earths, thorium and silver do not interfere. Specifies principle and procedure of the method, the reagents, apparatus, sampling, expression of results and test report.
Sodium carbonate for industrial use — Determination of sodium hydrogen carbonate content — Titrimetr...
The method is applicable to sodium carbonate products having a sodium hydrogen carbonate contained in a test portion into sodium carbonate by addition of a known excess of sodium hydroxide, precipitation of all the carbonate by means of barium chloride an determination of the excess of sodium hydroxide by means of a standard volumetric hydrochloric acid solution.
Sodium carbonate for industrial use — Determination of sulphate content — Barium sulphate gravimetri...
The principle in dissolution of a test portion and separation of the insoluble matter. Precipitation of sulphate as barium sulphate in dilute hydrochloric acid medium. Separation of the precipitate obtained and ignition at 800 °C +- 25 °C and weighing. The method is applicable to products having a sodium sulphate content equal to or greater than 0,01 % (m/m). Replaces ISO Recommendation R 743-…
Sodium carbonate for industrial use — Determination of loss of mass and of non-volatile matter at 25...
Describes a method of analysis of anhydrous sodium carbonate and sodium carbonate decahydrate. The principle of analysis consists in heating of thin layers of a test portion to constant mass at 250 °C. The residue constitutes the non-volatile matter at 250 °C. The loss of mass represents water in its various forms plus half the carbon dioxide content of the hydrogen carbonate present. Replaces…
Sodium and potassium silicates for industrial use — Determination of silica content — Gravimetric me...
The procedure is based on evaporation to dryness of a test portion previously acidified with hydrochloric acid. Dissolution of the soluble salts, filtration and washing of the insoluble matter. Second evaporation of the filtrate and washings under the same conditions, further dissolution of the soluble salts, filtration and washing. Calcination and weighing of the two lots of insoluble matter…
