Search

Applicable to products of which the Cu content is more than 0,1 mg/kg. The detection bases on the formation of a coloured complex of copper and of zinc dibenzyldithiocarbamate and photometric measurement at a wavelength of about 435 nm.

Specifies a reduced molybdosilicate spectrophotometric method for the determination of the soluble silica content of phosphoric acid for industrial use. The method can be used for the determination of 1 µg of soluble silica in the presence of 20 mg of phosphorus pentoxide. It is thus, for example, applicable to the determination of soluble silica contents greater than 30 mg/kg if the phosphoric…

The method is applicable to all zinc types provided that their copper content is 0,01 % maximum. The determination is suitable for iron contents between 0,001 and 0,01 %. This standard specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.

Based on dissolution of a test sample in water, distillation of the ammonia after displacement by an alkali solution. Absorption in an excess of standard volumetric sulphuric acid solution and back-titration with standard volumetric sodium hydroxide solution in the presence of methyl red/methylene blue mixed indicator. A typical distillation apparatus is shown in a figure.

The method is applicable to Zn 99,5, Zn 98,5 and Zn 98 and is suitable for the determination of lead contents between 0,1 and 3 %. Specifies principle, reagents, apparatus, sampling, procedure, expression of results and test report.

The method is applicable to Zn 99,995, Zn 99,99 and Zn 99,95. Although these types of zinc do not normally contain any thallium or indium, these two elements, if present, can interfere in this determination. The method is suitable for the determination of lead and cadmium contents between 0,001 and 0,05 %.

Specifies two methods applicable to Zn 99,995, Zn 99,99, Zn 99,95, Zn 99,5 and Zn 98,5. The first method is suitable for the determination of copper contents between 0,0005 and 0,005 %. The second method applies to copper contents between 0,0025 and 0,1 %.

This method applies to the following types of zinc: Zn 99,95, Zn 99,5, Zn 98,5 and Zn 98 having cadmium contents between 0,01 and 0,5 %. It does not apply to zinc the copper content of which is more than four times higher as the cadmium content.

The method is applicable to the following zinc alloys: Zn Al 4, Zn Al 4 Cu 1, Zn Al 4 Cu 3, Zn Al 11 Cu 1. It is moreover applicable to die castings made from these alloys, and to zinc containing more than 0,01 % of copper. The method is suitable for the determination of iron contents between 0,01 and 0,08 %.