Wheat flour and rye flour — General guidance on the drafting of bread-making tests
The guidance follows the standard layout widely used for methods of analysis and thus ensures that no element id left unconsidered by the user when elaborating or drafting a bread-making test. It provides information on the contents of the clauses, such as scope and field of application, principle, ingredients, apparatus, sampling, procedure, expression of results, test report.
Reinforced plastics based on unsaturated polyester resins — Determination of residual styrene monome...
The residual styrene monomer content in reinforced plastics based on unsaturated polyester (UP) resins is an important criterion in evaluating the degree of cure of UP resins in the polymerized state. The determination is carried out by extraction of the residual monomer styrene from the UP resin in the polymerized state using dichloromethane and subsequent gaschromatographic analysis of the…
Dried whey — Determination of nitrate and nitrite contents — Method by cadmium reduction and spectro...
The principle of determination consists in dissolving the dried whey in warm water, precipitating the fat and proteins, filtering and reducing the nitrate in a portion of the filtrate to nitrite by means of copperized cadmium. The sampling shall be made as specified in ISO 707. A figure shows the apparatus for nitrate reduction.
Procedure for Measurement of Sound and Vibration Due to Blasting Operations
1. Scope
1.1 This Standard covers the procedures for the measurement of airborne sound (Clause 4) and ground-borne vibration (Clause 5) from blasting such as construction and quarrying. Note: This Standard should not be used for measurements of blasts underground without a full evaluation of the frequency content of the vibration, to be sure it falls within the limits of this Standard as…
Rubber latex — Determination of coagulum content (sieve residue)
Specifies a method for the determination of coagulum content (sieve residue) of natural rubber latex concentrates containing preservative agents and also for the determination of the coagulum content (sieve residue) of synthetic rubber latices. Coagulum is defined as the material comprising pieces of coagulated rubber, latex skin and coarse foreign matter, retained unter the conditions of the…
Paper and board — Determination of moisture content — Oven-drying method
Applies to all paper and board, including corrugated fibreboard and solid fibreboard, provided that the paper or board does not contain any substance, other than water, that will escape at the temperature specified for test.
Liquefied anhydrous ammonia for industrial use — Determination of water content — Gas chromatographi...
The water present in a sample is tranformed into acetylene by reaction with calcium carbide. The acetylene formed is determined by gas chromatography using an external standard consisting of a standard gas mixture with an inert gas, containing a known amount of acetylene. The method is applicable to products having water contents between 5 mg/kg and 3000 mg/kg.
Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for ...
Gives the methods for tests at low temperature which apply to PVC
and PV compounds.
The contents of the corrigendum of May 1986 have been included in
this copy.
Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for ...
Give the thermal ageing methods which apply to the most common
types of insulating and sheathing compounds (elastomeric, PVC, PE,
PP, etc.)
The contents of the corrigendum of May 1986 have been included in this copy.
