Search

ISO/TR 17384:2008 describes the message contents and format of the air interface between the infrastructure and the in-vehicle unit in the Interactive CDRG system. The air interface message set for route guidance information in the interactive CDRG system in this Technical Report is applicable to both vehicles equipped with an onboard map database and those which are not equipped (i.e., those…

ISO 8292-1:2008 specifies a direct method for the determination of solid fat content in animal and vegetable fats and oils (hereafter designated "fats") using low-resolution pulsed nuclear magnetic resonance spectrometry. Two alternative thermal pre-treatments are specified: one for general purpose fats not exhibiting pronounced polymorphism and which stabilize mainly in the β'-…

ISO 8292-2:2008 specifies an indirect method for the determination of the solid fat content in animal and vegetable fats and oils (hereafter designated "fats") using low-resolution pulsed nuclear magnetic resonance spectrometry. Two alternative thermal pre-treatments are specified: one for general purpose fats not exhibiting pronounced polymorphism and which stabilize mainly in the β…

ISO 21549-5:2008 establishes a common framework for the content and the structure of identification data held on healthcare data cards. It specifies the basic structure of the data, but does not specify particular data-sets for storage on devices. The detailed functions and mechanisms of the following services are not within the scope of ISO 21549-5:2008 (although its structures can accommodate…

IEC 60335-2-13 deals with the safety of electric deep fat fryers, frying pans and other appliances in which oil is used for cooking, and intended for household use only, their rated voltage being not more than 250 V. This standard does not apply to deep fat fryers having a recommended maximum quantity of oil exceeding 4 l (refer to IEC 60335-2-37) or commercial multi-purpose cooking pans (refer…

CISPR 25:2008 contains limits and procedures for the measurement of radio disturbances in the frequency range of 150 kHz to 2 500 MHz. The standard applies to any electronic/electrical component intended for use in vehicles, trailers and devices. Refer to International Telecommunications Union (ITU) publications for details of frequency allocations. The limits are intended to provide protection…

ISO 7781:2008 specifies methods for the determination of the soap and organic-acid content of raw styrene-butadiene rubber (SBR). Method A is the titration method using indicator reagent. Method B is the titration method using an autotitrator or pH-meter. The methods depend on the extraction of the organic acids and soaps from the rubber by means of a specified solvent. In practice, therefore, it…

IEC 60216-5 specifies the experimental and calculation procedures to be used for deriving the relative thermal endurance index of a material from experimental data obtained in accordance with the instructions of IEC 60216-1 and IEC 60216-2. The calculation procedures are supplementary to those of IEC 60216-3. Guidance is also given for assessment of thermal ageing after a single fixed time and…

ISO 18213-4:2008 specifies a procedure for making accurate determinations of the liquid height in nuclear-materials-accountancy tanks that are equipped with pneumatic systems for determining the liquid content. With such systems, gas is forced through a probe (dip tube) whose tip is submerged in the tank liquid. The pressure required to induce bubbling is measured with a manometer located at some…

ISO 18213-5:2008 specifies a procedure for making accurate determinations of liquid height in nuclear-materials-accountancy tanks that are equipped with pneumatic systems for determining the liquid content. With such systems, gas is forced through a probe (dip tube) whose tip is submerged in the tank liquid. The pressure required to induce bubbling is measured with a manometer located at some…