Search

ISO/TS 15638-17:2013 addresses the provision of ?Consignment and location monitoring' and specifies the form and content of such data required to support such systems, and access methods (4.1) to that data. ISO/TS 15638-17:2013 provides specifications (4.45) for common communications and data exchange aspects of the application service (4.3) Consignment and location monitoring that a…

B126 SERIES-13 - Water cisterns Preface This is the first edition of the CSA B126 Series of Standards, Water cisterns. It consists of the following Standards: (a) CSA B126.0, General requirements and methods of testing for water cisterns; (b) CSA B126.1, Installation of water cisterns; (c) CSA B126.2, Commissioning and field inspection of water cisterns; (d) CSA B126.3, Operation and…

1 Scope This part of IEC 61400 presents measurement procedures that enable noise emissions of a wind turbine to be characterised. This involves using measurement methods appropriate to noise emission assessment at locations close to the machine, in order to avoid errors due to sound propagation, but far away enough to allow for the finite source size. The procedures described are different…

IEC 80601-2-30:2009+A1:2013 applies to the basic safety and essential performance of automated sphygmomanometers, which by means of an inflatable cuff are used for intermittent indirect measurement of the blood pressure without arterial puncture. It covers electrically-powered intermittent, indirect measurement of the blood pressure without arterial puncture, me equipment with automatic methods…

ISO 13033:2013 establishes the means to derive seismic actions on nonstructural components and systems (NSCS) supported by or attached to new or existing buildings. It also provides procedures for the verification of NSCS seismic capacities. NSCS include architectural elements, mechanical and electrical systems, and building contents. ISO 13033:2013 is not a legally binding and enforceable code.…

ISO 10775:2013 specifies a method for the determination of traces of cadmium in all types of paper, board and pulp, including products containing recycled fibre, that can be wet-combusted in nitric acid as specified in ISO 10775:2013. The lower limit of the determination depends on the equipment used and is normally about 10 μg/kg. Cadmium present in pigments and fillers that do not dissolve in…

ISO 12571:2013 specifies two alternative methods for determining hygroscopic sorption properties of porous building materials and products: a) using desiccators and weighing cups (desiccator method); b) using a climatic chamber (climatic chamber method). The desiccator method is the reference method. ISO 12571:2013 does not specify the method for sampling. The methods specified in ISO 12571:2013…

ISO 4967:2013 specifies a micrographic method of determining the non-metallic inclusions in rolled or forged steel products having a reduction ratio of at least 3 using standard diagrams. This method is widely used to assess the suitability of a steel for a given use. However, since it is difficult to achieve reproducible results owing to the influence of the test operator, even with a large…

ISO 15031-7:2013 gives guidelines for the protection of road vehicle modules from unauthorized intrusion through a vehicle diagnostic data link. These security measures offer vehicle manufacturers the flexibility to tailor their security to their own specific needs and do not exclude other, additional measures. ISO 15031-7:2013 applies to vehicle modules whose solid-state memory contents are able…

IEC 61754-4:2013 defines the standard interface dimensions for type SC family of connectors. This second edition cancels and replaces the first edition published in 1997 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:<br /> - addition of the duplex plug and adaptor connector interface;<br /…