Health informatics — Categorial structures for representation of nursing diagnoses and nursing actio...
ISO 18104:2014 specifies the characteristics of two categorial structures, with the overall aim of supporting interoperability in the exchange of meaningful information between information systems in respect of nursing diagnoses and nursing actions. Categorial structures for nursing diagnoses and nursing actions support interoperability by providing common frameworks with which to analyse the…
Geographic information — Imagery sensor models for geopositioning — Part 2: SAR, InSAR, lidar and so...
ISO/TS 19130-2:2014 supports exploitation of remotely sensed images. It specifies the sensor models and metadata for geopositioning images remotely sensed by Synthetic Aperture Radar (SAR), Interferometric Synthetic Aperture Radar (InSAR), LIght Detection And Ranging (lidar), and SOund Navigation And Ranging (sonar) sensors. The specification also defines the metadata needed for the aerial…
Building Construction — Service Life Planning — Part 4: Service Life Planning using Building Informa...
ISO 15686-4:2014 provides information and guidance on the use of standards for information exchange for service life planning of buildings and constructed assets and their components as well as the required supporting data.
It provides guidance on structuring information from existing data sources to enable delivery of their information content in a structure that conforms to international…
1 Scope
1.1 General
This Standard specifies requirements for materials and methods for the manufacture, transportation, and
installation of architectural, structural, and specialty precast concrete products.
Note: This Standard should be specified for precast concrete elements used in segmental construction.
1.2 Shop drawings
This Standard specifies the requirements, in addition to those…
Scope
1.1
This Standard describes the methods for determining the level of depressurization and solutions to mitigate risk arising from depressurization.
1.2
This Standard applies to all existing single-family dwelling units contained in detached, semi-detached, and row houses equipped with an exhaust device, which have
a) a combustion device within the house; or
b) an attached…
Soils – Determination of the Water Content-Dry Density Relation – Standard Compaction Effort Test(60...
1 PURPOSE AND SCOPE
This standard specifies the test method to determine the relation between the water content and the
dry density of soil and soil aggregates mixes when they are compacted in a standard mould by a
2,495 kg rammer dropped from a height of 305 mm. Three methods are used to determine this
relation (see Chapter 5).
NOTE — The laboratory compaction test methods described in this…
Soils – Determination of the Water Content-Dry Density Relation – Modified Compaction Effort Test(27...
1 PURPOSE AND SCOPE
This standard specifies the test method to determine the relation between the water content and the
dry density of soil and soil aggregates mixes when they are compacted in a standard mould by a
4,536 kg rammers dropped from a height of 457 mm. Three methods are used to determine this
relation (see Chapter 5).
NOTE — The laboratory compaction test methods described in…
Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
IEC 60507:2013 is applicable for the determination of the power frequency withstand characteristics of ceramic and glass insulators to be used outdoors and exposed to polluted atmospheres, on a.c. systems with the highest voltage of the system greater than 1 000 V. These tests are not directly applicable to polymeric insulators, to greased insulators or to special types of insulators (insulators…
Fire safety engineering — Assessment, verification and validation of calculation methods — Part 3: E...
ISO 16730‑1 describes what the contents of a technical documentation and of a user's manual should be for an assessment, if the application of a calculation method as engineering tool to predict real-world scenarios leads to validated results. The purpose of ISO/TR 16730-3:2013 is to show how ISO 16730‑1 is applied to a calculation method, for a specific example. It demonstrates how…
