Search

This National Standard of Canada is equivalent to International Standard ISO/IEC 14776-222:2005. 1 Scope This part of ISO/IEC 14776 defines a second version of the SCSI Fibre Channel Protocol (FCP). This part of ISO/IEC 14776 is a mapping protocol for applying the SCSI command set to Fibre Channel. It defines how the Fibre Channel services and the defined Information Units (IUs) are used to…

This National Standard of Canada is equivalent to International Standard ISO/IEC 18013-1:2005. 1 Scope This part of ISO/IEC 18013 establishes guidelines for the design format and data content of an ISO compliant driving licence (IDL) in regard to both visual human-readable features and ISO machine-readable technologies. It creates a common basis for international use and mutual recognition…

This National Standard of Canada is equivalent to International Standard ISO/IEC 7816-12:2005. 1 Scope This part of ISO/IEC 7816 specifies the operating conditions of an integrated circuit card that provides a USB interface. Figure 1 shows the assignment of the contact fields for a USB interface and - to illustrate interoperability - the assignment as used in ISO/IEC 7816-3.

ISO 2321:2006 specifies methods of test for determining general physical and mechanical properties of rubber threads, as well as specific mechanical properties of such threads in contact with fabrics. Owing to the comparatively small cross-section and the unusual conditions of service of this material, certain special methods have been developed. Some of the tests included in this International…

ISO/IEC 15434:2006 defines the manner in which data is transferred to high-capacity automatic data capture (ADC) media from a supplier's information system and the manner in which data is transferred to the recipient's information system. It does not define the internal data storage format for specific high-capacity ADC media, nor does it specify the application of data structures…

ISO/IEC 15434:2006 defines the manner in which data is transferred to high-capacity automatic data capture (ADC) media from a supplier's information system and the manner in which data is transferred to the recipient's information system. It does not define the internal data storage format for specific high-capacity ADC media, nor does it specify the application of data structures…

1 Scope This International Standard is applicable to portable phase comparators with or without a builtin power source to be used on electrical systems for voltages from 1 kV to 36 kV a.c. and frequencies from 50 Hz to 60 Hz. This standard is applicable to two-pole phase comparators having a connecting lead between them, two-pole phase comparators operating with a wireless connection and…

ISO 76:2006 specifies methods of calculating the basic static load rating and the static equivalent load for rolling bearings within the size ranges shown in the relevant ISO standards, manufactured from contemporary, commonly used, high quality, hardened bearing steel in accordance with good manufacturing practice and basically of conventional design as regards the shape of the rolling contact…

This CSA Standard is a joint Standard with UL 224. 1 Scope 1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or thermoplastic polymers (see Table 1 for materials and ratings). These requirements also cover heat-shrinkable…

1 Scope 1.1 This Standard covers the features of three-phase submersible transformers rated 75 to 3000 kV.A. Note: For details not covered herein, reference should be made to CSA C2.1. 1.2 This Standard applies only to three-phase distribution transformer units intended for use in a ventilated vault or enclosure below grade level, with all terminations and accessories cover mounted, or nearly…