Applies both to capacitor units and capacitor banks intended to be used connected in series with an a.c. transmission or distribution line or circuit forming part of an a.c. power system having a frequency of 15 Hz to 60 Hz. The series capacitor units and banks are usually intended for high voltage power systems. This standard is applicable to the complete voltage range.
Note: For internal…
1. SCOPE
1.1 This Specification applies to complete flue-connected oil burning stoves
incorporating oil burners of the vapourizing-type.
1.2 The requirements given herein apply to circulating and radiant room
heaters, ranges, and combination ranges, as defined in this Specification.
Note: The following related appliances are covered by other CSA Standards:
(a) Mobile hone…
Quartz crystal units for oscillators - Part 3: Standard outlines
Loose-leaf booklet containing standard outlines and pin connections. Thirty-four standard sheets are included and supplements will be issued as new outlines are developed.
Toggler switches - Part 1: General requirements and measuring methods
Applies to lever switches for use in electronic and electromechanical equipment, including switches necessary to connect the supply mains. Switches covered by this standard have a maximum rated voltage not exceeding 500 V and a maximum rated current not exceeding 25 A (d.c. or a.c. r.m.s. values).
Establishes uniform specifications and type test requirements for lever switches also establish…
1. SCOPE
1.1 This Specification applies to cord-connected room air conditioners rated
not more that 250 volts, single phase, 20 amperes, designed to be used in
accordance with the Rules of Canadian Electrical Code, Part I.
1.2 This Specification applies to self-contained air-cooled window, or console
or built-in-wall type room air conditioners, which have hermetic-type
condensing…
1. Scope
This Specification applies to electrical equipment used on, or in close connection with, woodworking
machinery for use in industrial applications and designed to be installed and employed in accordance with the rules of Part I of this Code.
It does not apply to
(a) small machines of the hobby type intended for use only in domestic or similar occupancies;
(b)…
Construction and Test of Electrically Equipped Machine Tools
1. Scope
This Specification applies to machine tools, not portable by hand, (but which may have certain portable parts), having electrical equipment mounted thereon and designed to be installed and employed in accordance with the rules of Part I of this Code.
It does not apply to:
(a) Machine tools which produce hazardous atmospheres due to their operation and therefore require the…
