Search

IEC 60269-2:2013+AMD1:2016+AMD2:2024 CSV provides supplementary requirements for fuses for use by authorized persons and are generally designed to be used in installations where the fuse-links are accessible to, and may be replaced by, authorized persons only. Fuses for use by authorized persons according to the following fuse systems also comply with the requirements of the corresponding…

This document specifies safety, constructional, performance, testing and documentation requirements of gas safety shut-off devices (SSDs). This document is applicable to SSDs with operating pressures greater than 500 kPa (5 bar) up to 10 MPa (100 bar) of nominal connection sizes up to and including DN 400 for use with fuel gases such as natural gas, manufactured gas, biomethane or liquefied…

This document applies only to dimethyl-ether refuelling connectors with a pressure-equalizing port, hereinafter referred to as devices, constructed entirely of new, unused parts and materials. Dimethyl-ether refuelling connectors with a pressure-equalizing port consist of the following components, as applicable: a)       nozzle with a pressure-equalizing port, The refuelling nozzle and pressure-…

This document specifies methods for testing the immunity of passenger cars and commercial vehicles to electromagnetic disturbances from on-board transmitters connected to an external antenna and portable transmitters with integral antennas, regardless of the vehicle propulsion system (e.g. spark ignition engine, diesel engine, electric motor).

IEC TR 63323:2024 deals with a new proposal for an SC adaptor connector which includes a flexible retaining element on its top surface, compared to the SC standard adaptor. With this solution, when the SC plug connector is in place, any accidental disconnection is difficult, as it employs an external tool or a particular unlocking manoeuvre. This new adaptor is intended primarily for the home…

This document in combination with ISO 5474-1 specifies requirements for conductive power transfer using alternating current (AC) with a voltage up to 1 000 V a.c. between electrically-propelled road vehicles and external electric circuits. NOTE          External electric circuits are not part of the vehicle. This document provides requirements for conductive charging in modes 2, 3 according to…

This document specifies requirements for compressed air foam systems (CAFS) in which foam concentrate and compressed air are continuously added to the water being discharged from the fire-fighting pump. This document is applicable to CAFS that can be permanently installed in fire-fighting vehicles, or that are transportable or mobile. This document specifies requirements for CAFS which are used…

Scope 1.1 These requirements cover emergency breakaway fittings, swivel connectors and pipe-connecting fittings of the threadless compression type. Connectors and fittings covered by these requirements are intended only for the following services. 1.2 Emergency breakaway fittings, swivel connectors and pipe-connecting fittings for gasoline/ethanol blends with nominal ethanol concentrations…

Scope 1.1 These requirements cover emergency breakaway fittings, swivel connectors and pipe-connecting fittings of the threadless compression type. Connectors and fittings covered by these requirements are intended only for flammable and combustible liquid service. 1.2 Emergency breakaway fittings, swivel connectors and pipe-connecting fittings for diesel fuel, biodiesel fuel, diesel/…

Scope 1.1 These requirements cover hose and hose assemblies, including vapor recovery hose and assemblies, for use on dispensing devices for motor fuels. A flammable liquid hose assembly consists of flexible hose and fittings suitable for attachment to motor fuel dispensing equipment. Motor fuels, as defined by these requirements, include one or more of the fuels described in 1.3. 1.2 Hose…