Search

IEC 63098-3:2022 La présente partie de l’IEC 63098 spécifie l’interface RoF établissant la connexion de la station centrale avec les têtes radar distantes dans un système radar distant, et fournit aussi les informations nécessaires pour assurer la compatibilité entre les fournisseurs et, par conséquent, choisir des systèmes appropriés qui permettent de couvrir tous les types de systèmes RoF quels…

1 Scope 1.1 Applicability This Standard applies to newly produced compressed natural gas vehicle (NGV) fuelling connection devices, hereinafter referred to as “devices”, constructed entirely of new, unused parts and materials. NGV fuelling connection devices consist of the following components, as applicable: a) receptacle and protective cap (mounted on vehicle) (see Clause 4.4); b) nozzle…

1 Scope 1.1 This Standard applies to conductive electric vehicle (EV) supply equipment with a primary source voltage of 1000 V ac or less, with a frequency of 50 or 60 Hz, and intended to provide ac power to an electric vehicle with an on-board charging unit. This Standard covers electric vehicle supply equipment intended for use where ventilation is not required. 1.2 With reference to 1.1,…

This document describes the implement messages application layer of the network, specifying the message set and defining the messages used for communication with and between tractors and connected implements.

IEC 60700-3:2022 specifies the service conditions, the definitions of essential ratings and characteristics of thyristor valves utilized in line commutated converters with three-phase bridge connections to realize the conversion from AC to DC and vice versa for high voltage direct current (HVDC) power transmission applications. It is applicable for air insulated, liquid cooled and indoor…

IEC 62040-1:2017+AMD1:2021+AMD2:2022 applies to movable, stationary, fixed or built-in UPS for use in low-voltage distribution systems and that are intended to be installed in an area accessible by an ordinary person or in a restricted access area as applicable, that deliver fixed frequency AC output voltage with port voltages not exceeding 1 000 V AC or 1 500 V DC and that include an energy…

IEC TR 63401-1:2022(E) discusses the challenges of connecting inverter-based resources to low short circuit ratio AC networks, key technical issues and emerging technologies. There are the steady-state stability issue, transient state stability issue, and oscillatory stability issue, which are the most distinct differences compared to inverter-based resources or traditional generators, and…

This document specifies the requirements for the design, materials, construction, installation and testing of permanently installed fuel systems as installed for internal combustion engines. It applies to all parts of permanently installed diesel and petrol fuel systems as installed, from the fuel fill opening to the point of connection with the propulsion or auxiliary engine(s) on inboard- and…

IEC 60286-3:2022 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 60286-3:2022 edition 7.0 and the previous IEC 60286-3:2019 edition 6.0. Futhermore, comments from IEC TC 40 experts are provided to explain the reasons of the most relevant changes. IEC 60286-3:2022 is applicable…

IEC 60286-3:2022 is applicable to the tape packaging of electronic components without leads or with lead stumps, intended to be connected to electronic circuits. It includes only those dimensions that are essential for the taping of components intended for the above-mentioned purposes. This document also includes requirements related to the packaging of singulated die products including bare die…