Search

1.1 The wire connectors covered by these requirements are intended for use with copper conductor in accordance with installations covered by the National Electrical Code, NFPA 70; the Canadian Electrical Code, Part I, C22.1; and NOM 001 SEDE, Standard for Electrical Installations. The requirements in this standard cover twist-on style splicing sealed wire connectors intended for installations for…

This Code applies to all electrical work and electrical equipment operating or intended to operate at all voltages in electrical installations for buildings, structures, and premises, including factory-built relocatable and non-relocatable structures, and self-propelled marine vessels stationary for periods exceeding five months and connected to a shore supply of electricity continuously or…

1.1 Cette norme indique les exigences d’efficacité énergétique et de rendement des luminaires à DEL des types directionnel et non directionnel employés pour l’éclairage ordinaire, y compris ceux pour l’éclairage commercial et résidentiel intérieur et extérieur, de même que ceux dont la fonction est principalement décorative. Notes : 1) Les luminaires à lumière blanche modulable et les luminaires…

1.1 This Standard applies to dc arc fault protective devices (DC-AFPDs) and devices incorporating arc fault circuit protection intended for use in direct current circuits in photovoltaic (PV) systems having a maximum voltage rating of 1000 V dc and intended for installation in accordance with the rules of the Canadian Electrical Code, Part I. 1.2 This Standard contains construction, test, and…

This Technical Report provides guidance for developing a consistent and secure method of biometric (either alone or supported by non-biometric) personalization and authentication in a mobile environment for systems procured on the open market. Guidance is provided for — 1:1 verification or 1:few positive identification; — biometric sample capture in the mobile environment where conditions are not…

This International Standard specifies the requirements and recommendations for the attributes of automated infrastructure management (AIM) systems. This International Standard explains how AIM systems can contribute to operational efficiency and deliver benefits to a) cabling infrastructure and connected device administration, b) facilities and IT management processes and systems, c) other…

This part of ISO/IEC 23005 specifies syntax and semantics of the data formats for interaction devices, i.e. Device Commands and Sensed Information, required for providing interoperability in controlling interaction devices and in sensing information from interaction devices in real as well as virtual worlds. This part of ISO/IEC 23005 aims to provide data formats for industry-ready interaction…

For the purpose of providing compatible authentication, authorization, and cryptographic key agreement mechanisms to support secure communication between devices connected by IEEE 802® Local Area Networks (LANs), this standard a) Specifies a general method for provision of port-based network access control. b) Specifies protocols that establish secure associations for IEEE Std 802.1AE™ MAC…

1 Scope This part of ISO/IEC 27035 provides the guidelines to plan and prepare for incident response. The guidelines are based on the “Plan and Prepare” phase and the “Lessons Learned” phase of the “Information security incident management phases” model presented in ISO/IEC 27035-1. The major points within the “Plan and Prepare” phase include the following: — information security incident…

IEC 61076-3-119:2017 establishes specifications and test requirements for 10-way shielded and unshielded rectangular, free and fixed connectors, with push-pull coupling, for data transmission with frequencies up to 100 MHz and for use in industrial environments.<br /> This document specifies free and fixed connectors with round contacts, suitable for screw or crimp terminations. Other…