Information technology - Specification and standardization of data elements - Part 6: Registration o...
This National Standard of Canada is equivalent to International Standard ISO/IEC 11179-6:1997.
1 Scope
For each data element to be registered, this part of ISO/IEC 11179 defines the
type of information that shall be specified, the conditions that shall be met,
and the procedure(s) that shall be followed. This part of ISO/IEC 11179 does
NOT specify the register's system design, file…
1. Scope
1.1
This Standard is intended as a specification for the certification of products as suitable for installation as roadway noise barriers.
1.2
This Standard is also intended to specify the requirements for certification of the installation of individual barrier sites.
1.3
This Standard is also intended to specify the requirements for noise barrier design and materials.…
Biological evaluation of medical devices - Part 13: Identification and quantification of degradation...
This National Standard of Canada is equivalent to International Standard ISO 10993-13:1998.
1 Scope
This part of ISO 10993 provides guidance on general requirements for the design
of tests for identifying and quantifying degradation products from finished
polymeric medical devices ready for clinical use.
This part of ISO 10993 describes two test methods to generate degradation…
Spécifications pour types particuliers de fils de bobinage - Partie 19: Fil de section circulaire en...
IEC 60317-19:1990 concerne les fils de bobinage de section circulaire en cuivre emaillé brasable de classe 130 avec un double revêtement. La sous-couche est à base de résine polyurethanne, peut être modifiée. Elle doit conserver l'identité chimique de la résine initiale et répondre à toutes les exigences du fil. La surcouche est à base de résine polyamide. NOTE Une résine modifiée est une…
Plastiques — Détermination de la température de fragilité au choc
La présente Norme internationale spécifie une méthode pour la détermination de la température à laquelle les plastiques qui ne sont pas rigides à la température ambiante normale, présentent une rupture fragile dans des conditions spécifiées d'application de chocs. Une variante de la présente méthode utilisant des éprouvettes entaillées, donne des valeurs de fragilité à une température…
Plastics — Determination of the brittleness temperature by impact
This International Standard specifies a method for the determination of the temperature at which plastics that are not rigid at normal ambient temperature exhibit brittle failure under specified impact conditions. A supplementary technique using notched specimens develops brittleness values at a much higher temperature than are observed for unnotched specimens of the same plastic material. The…
Norme pour la certification des ouvrages antibruit
1. Domaine d.application
1.1
Cette norme est conçue pour servir de spécification pour la certification des produits pouvant être installés comme ouvrages antibruit le long des routes.
1.2
Cette norme a aussi pour but de préciser les exigences pour la certification de chaque installation d.ouvrage antibruit en particulier.
1.3
Cette norme a aussi pour but de préciser les exigences…