Search

Concerns laboratory tests used to measure the toxic components of the fire effluent from either electrotechnical products or materials used in electrotechnical products. It provides guidance on the use and interpretation of results from such tests. It discusses currently available approaches to toxic hazard assessment consistent with the approach of ISO TC 92 SC 3, as set out in ISO/TR 9122…

1 Scope 1.1 General 1.1.1 This Standard specifies minimum requirements for and provides guidance on design principles, safety levels, and loads in connection with the design, construction, transportation, installation, and decommissioning of offshore structures. 1.1.2 This Standard is intended to cover all offshore structures and all parts of offshore structures (including the main deck and…

Is a PAS (Publicly Available Specification) providing information on sentences necessary to interface shipborne alarm systems with the voyage data recorder (VDR). Is to be used in conjunction with IEC 61162-1 and IEC 61162-2. The VDR is required to acquire data on engine, cargo and deck monitoring status in addition to the navigation and radiocommunications.

ISO/TR 13425:2003 gives guidance on the selection and an overview of all the referenced standards, guides, technical reports and DIS developed by ISO/TC 69 from a user prospective. DIS are drafts which can be amended. Both categories are documents, which are available to the public. ISO/TR 13425:2003 also gives two descriptions of the content of the standards by two sets of abstracts: non-…

A technical report dealing with the correlation and transformation of the conditions given in IEC 60721-3 to the environmental tests defined in IEC 60068-2. It is an introduction to the series of publications IEC 60721-4 which aims at providing the specification writer with guidance together with a set of easy-to-use tables to help correlate and transform these conditions. The purpose of this…

This part of International Standard IEC 60044 applies to new single-phase capacitor voltage transformers connected between line and ground for system voltages Um ³ 72,5 kV at power frequencies from 15 Hz to 100 Hz. They are intended to supply a low voltage for measurement, control and protective functions. This publication has the status of a PAS. A PAS is a technical specification not…

Is a publicly available specification providing information on the necessary interface standards for use with the UAIS, which are not available in the current issue of IEC 61162-1 Ed 2. The interface standards are currently being adopted in the NMEA 0183 standard and alignment will be maintained.

The VMEbus specification defines an interfacing system used to interconnect microprocessors, data storage and peripheral control devices in a closely-coupled hardware configuration. Its objectives include allowing communication between devices on the VMEbus without disturbing the internal activities of other devices on the VMEbus, allowing a broad range of design latitude so that the designer can…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10175-1:1996 (first edition, 1996-09-01), including Technical Corrigendum #1:2001, #2:2001, #3:2001 and #4:2001. 1 Scope ISO/IEC 10175 consists of three parts: Part 1: Abstract service definitions and procedures Part 2: Protocol specification Part 3: Management abstract service definition and…

This National Standard of Canada is equivalent to International Standard ISO/IEC 10175-2:1996 (first edition, 1996-09-01). 1 Scope ISO/IEC 10175 consists of three parts: Part 1: Abstract service definition and procedures Part 2: Protocol specification Part 3: Management abstract service definition and procedures This part of ISO/IEC 10175: - specifies the abstract syntax…