Search

These requirements cover the construction and operation of inert gas clean agent fire extinguishing system units intended to be installed, inspected, tested, and maintained in accordance with the Standard for Clean Agent Fire Extinguishing Systems, NFPA 2001 and with the National Fire Code of Canada.

Les présentes exigences s’appliquent à la construction et à l’utilisation des unités de système d’extinction aux agents propres à gaz inerte conçues pour être installées, inspectées, mises à l’essai et entretenues en conformité avec la norme NFPA 2001, Standard on Clean Agent Fire Extinguishing Systems, et avec le Code national de prévention des incendies du Canada.

1.1 General This Standard covers the test requirements used to measure battery charger energy consumption for battery chargers intended to be operated from 115 V ac, 60 Hz line voltage connected by plug to wall receptacles or existing dc sources (such as automotive power jacks or USB ports). Uninterruptible power supplies that utilize the standardized National Electrical Manufacturer Association…

This International Standard applies to all mobile elevating work platforms (MEWPs) that are intended to position persons, tools and materials and which, as a minimum, consists of a work platform with controls, an extending structure and a chassis. The technical safety requirements of this International Standard apply except where national or local regulations are more stringent. For related…

This International Standard provides methods for preparing training materials and administering standardized training to operators (drivers) of mobile elevating work platforms (MEWPs). It is applicable to MEWPs, as defined in ISO 16368, intended to move persons, tools and materials to positions where they can carry out work from the work platform. NOTE National or other regulations, which…

This clause of part 1 is replaced by the following: This International Standard deals with the safety of the following appliances, their RATED VOLTAGE being not more than 250 V for single-phase appliances, 480 V for other appliances and 24 V d.c. for appliances when battery operated: – REFRIGERATING APPLIANCES for household and similar use; – ICE-MAKERS incorporating a motor-compressor and…

This document describes the consensus standardization process established by the Bureau de normalisation du Québec (BNQ) to meet the accreditation requirements of the standards development organizations of the Standards Council of Canada (SCC). This process is based on the requirements and guidelines set out in the document Canadian Standards Development — Requirements & Guidance —…

IEC 60335-2-24:2010+A1:2012+A2:2017 deals with the safety of the following appliances, refrigerating appliances for household and similar use; ice-makers incorporating a motor-compressor and ice-makers intended to be used in frozen food storage compartments; refrigerating appliances and ice-makers for use in camping, touring caravans and boats for leisure purposes, their rated voltage being not…

IEC 60335-2-39:2012+A1:2017 deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household and similar use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. This standard also deals with pressurized appliances and appliances with pressurized parts.…

IEC 62115:2017 specifies safety requirements for electric toys that have at least one function dependant on electricity, electric toys being any product designed or intended, whether or not exclusively, for use in play by children under 14 years of age. Examples of electric toys also within the scope of this standard are: - constructional sets; - experimental sets; - functional electric toys…