Search

1 Scope 1.1 General This Standard pertains to the characterization of radioactive waste and irradiated fuel. This Standard a) specifies the overall requirements for establishing and implementing a waste characterization strategy, program, and plan; b) specifies methodologies for the sampling and characterization of radioactive waste and irradiated fuel; c) provides guidance for the timing…

1 Scope 1.1 This Standard applies to locking-type, pin and sleeve type plugs, receptacles, power inlets, connectors, junction boxes, and live-end covers rated up to 1200 A (for single- and multi-pole) and above 750 V to 35 kV ac, 50/60 Hz or up to 1500 V dc and which shall have one or more pilot contacts for multi-pole configuration and above 750 V to 1000 V ac or dc for single pole…

IEC 62841-3-12:2017+A1:2021 applies to transportable threading machines. The rated voltage is not more than 250 V for single-phase a.c. or d.c. tools, and 480 V for three-phase a.c. tools. The rated input is not more than 3 700 W. The limits for the applicability of this standard for battery tools are given in Annex K. This standard deals with the hazards presented by tools which are encountered…

IEC 60335-2-72:2021 deals with the safety of powered ride-on and powered walk-behind machines intended for commercial indoor or outdoor use for the following applications: - sweeping, - scrubbing, - wet or dry pick-up, - polishing, - application of wax, sealing products and powder-based detergents, - shampooing of floors. These machines have a cleaning motion which is more linear than…

IEC 60335-2-72:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition. IEC 60335-2-72:2021 deals with the safety of powered ride-on and powered walk-behind machines intended for…

IEC 61936-1:2021 provides requirements for the design and the erection of electrical power installations in systems with nominal voltages exceeding 1 kV AC and nominal frequency up to and including 60 Hz, so as to provide safety and proper functioning for the use intended. This document does not apply to the design and erection of any of the following: – overhead and underground lines between…

IEC 61936-1:2021 CMV contains both the official standard and its commented version. The commented version provides you with a quick and easy way to compare all the changes between IEC 61936-1:2021 CMV edition 3.0 and the previous IEC 61936-1:2010+AMD1:2014 CSV edition 2.1. Futhermore, comments from IEC TC 99 experts are provided to explain the reasons of the most relevant changes. IEC 61936-1:…

1 Scope 1.1 This Standard applies to electric clothes dryers intended to be used in nonhazardous locations in accordance with CSA C22.1, Canadian Electrical Code, Part I (CE Code, Part I) and the (U.S.) National Electrical Code (NEC), on circuits having a nominal voltage not exceeding 600 V. Note: Wherever practical, for convenience, the term "appliance" has been used in lieu of…

1 Scope This Standard applies to the safety of electric fence energizers, the rated voltage of which is not more than 250 V, intended for agricultural use, for control of domestic farm and feral animals NOTE 101 Examples of electric fence energizers coming within the scope of this standard are: – mains-operated energizers; – battery-operated electric fence energizers suitable for…

1 Scope 1.1 This Standard provides requirements and guidance on the structural design of new wastewater treatment plants, including buildings and liquid-containing tanks, from the point effluent enters the plant to the point of its discharge. 1.2 This Standard is written in support of the design process provided by the National Building Code of Canada, but includes additional requirements…