Code of Practice for Safety in Demolition of Structures
1. Scope
1.1 General
1.1.1 This Standard outlines the safety precautions to be observed and procedures to be used before, during, and after demolition operations to provide for the safety of the public, workers, and property.
1.1.2 Demolition procedures for both systematic and rapid progressive failure methods are described. Particular emphasis is given to areas of known concern…
Load Test Procedure for Wood Roof Trusses for Houses and Small Buildings
1. Scope
1.1 General
This Standard covers the load test procedure for evaluating the
strength and deformation performance of wood roof trusses intended for
use in housing and small buildings as defined in Part 9 of the National
Building Code of Canada.
Note: Part 9 of the National Building Code of Canada provides detailed
requirements…
Amendement 1 - Prises de courant pour usage domestique et usage général similaire. Normes.
Regroupe les feuilles de normes relatives à trois séries de prises de courant pour usage domestique et usage général similaire:
Série A: American National Standards Institute (A.N.S.I.)
Série B: British Standards Institution (B.S.I.)
Série C: Commission Internationale de Réglementation en
vue de l'Approbation de l'Equipement Electrique
(C.E.E.).
Cette publication a le statut d'un…
Applies to the basic Canada Standard sizing system for woman's
apparel. It describes the system and development procedure and
provides in tabular form body measurements in metric units for
standard size ranges covering practically all of the adult female
population. This sizing system does not cover footwear, hosiery
or gloves.
Canada Standard System for Sizing Infants' Apparel
1. SCOPE
1.1 This standard describes the basic Canada Standard sizing system for
determining the body size of infants. It outlines the development of the
system and provides in tabular form body measurements in metric units for a
standard size range that includes approximately 90% of Canadian infants, male
and female, from birth to approximately thirty months of age. The system
provides a…
Application of the Canada Standard System for the Sizing of Girls' and Boys'
Apparel
1. SCOPE
1.1 This standard presents a modification of the complete Canada Standard
sizing system described in CAN2-49.5-M. More specifically the control
dimensions given in CAN2-49.5-M are called size indicator dimensions and for
all children's and girl's sizes, crotch height has been replaced by waist
height as the vertical size indicator dimension to conform more closely to
present…
Bases for the design of structures — Deformations of buildings at the serviceability limit states
Establishes the basic principles that should be adopted when setting up national standards, regulations and recommendations for the deformation of buildings at the limit states of serviceability. Refers to the deformations at the serviceability limit states of buildings such as dwellings, offices, public buildings, and factories. Does not refer to the deformations of bridges, roads, masts,…
ISO/IEC code of principles on "reference to standards"
The standards-making procedures of ISO and IEC and their members are at the disposal of intergovernmental organizations and national governmental agencies wishing to use the principle of reference to standards. This Guide gives 5 principles which have been adopted by the ISO and IEC Councils with a view to guiding the work of ISO and IEC towards standards which can be referenced in legislation or…
