Search

This National Standard of Canada is equivalent to International Standard ISo 10006:1997. 1 Scope These guidelines use project management processes to serve as a framework to discuss their application. This International Standard is applicable to projects of varying complexity, small or large, of short or long duration, in different environments, and irrespective of the kind of…

This National Standard of Canada is based on the International Standard CEI/IEC 60601-2-36:1997 (First edition, 1997-03). 1. Scope and object This clause of the General Standard applies except as follows: 1.1 Scope Addition: This Particular Standard applies to the safety of EQUIPMENT FOR EXTRACORPOREALLY INDUCED LITHOTRIPSY as defined in 2.1.101. This applicability of this Particular…

This National Standard of Canada is equivalent to International Standard CEI/IEC 155: 1993. 1 Scope This standard specifies interchangeable glow-starters used with pre-heat type fluorescent lamps, hereafter called "starters". Section 1 specifies the general and safety requirements with which starters shall comply. Section 2 specifies the performance. NOTE - Starters…

This National Standard of Canada is equivalent to International Standard ISO 105-E03:1994. 1 Scope This part of ISO 105 specifies a method for determining the resistance of the colour of textiles of all kinds and in all forms to the action of active chlorine in concentrations such as are used to disinfect swimming-pool water (break-point chlorination). Three alternative test conditions are…

This National Standard of Canada is based on International Standard CEI/IEC 1008-1: 1990, (first edition, 1990-12), with Corrigendum 1990 and Amendments 1:1992 and 2:1995. 1. Scope This International Standard applies to residual current operated circuit-breakers functionally independent of, or functionally dependent on, line voltage, for household and similar uses, not incorporating…

This National Standard of Canada is based on International Standard CEI/IEC 926:1995 1. Scope This standard specifies general and safety requirements for starting devices (starters and ignitors) for tubular fluorescent and other discharge lamps for use on a.c. supplies up to 1 000 V at 50 Hz or 60 Hz which produce starting pulses not greater than 100 kV and which are used in combination…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-042: 1997. 1 Scope and object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This standard applies to AUTOCLAVES and STERILIZERS, including those with an automatic loading and unloading system, which incorporate a CHAMBER using toxic gas intended for the treatment of…

This National Standard of Canada is equivalent to International Standard CEI/IEC 61010-2-043: 1997. 1. Scope and Object This clause of part 1 is applicable except as follows: 1.1 Scope Replacement: This standard applies to STERILIZERS, including those having an automatic loading and unloading system, with one or more C HAMBERS operating at approximately atmospheric pressure and using…

1.1 SCOPE 1.1.1 This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with propane; c. Direct vent appliances for manufactured (mobile) home OEm…

This is a searchable PDF. 1.1 Scope and References 1.1.1 This standard applies to packaged, self-contained or factory matched packages of integrated systems (see 1.2.1) fuel cell power plants, hereinafter referred to as power plant(s), which, through electrochemical reactions and other processes, generate alternating-current electricity. 1.1.2 This standard applies to power…