Search

This National Standard of Canada is equivalent to International Standard ISO 14269-4:1997. 1 Scope This part of ISO 14269 specifies a uniform test method for determining performance levels of operator enclosure panel-type air filters. It is applicable to tractors and self-propelled machines for agriculture and forestry when equipped with an operator enclosure with a ventilation system.

This National Standard of Canada is equivalent to International Standard ISO 14269-5:1997. 1 Scope This part of ISO 14269 specifies a test procedure which will provide for uniform measurement of the pressurization inside an operator enclosure of tractors and self-propelled machines for agriculture and forestry when equipped with a ventilation system.

1.1 Scope 1.1.1 This Standard applies to luminaires for use in nonhazardous locations that are intended for installation on branch circuits of 600 V nominal or less between conductors in accordance with the Canadian Electrical Code, Part I (CE Code, Part I), and the ANSI/NFPA 70 National Electrical Code (NEC). 1.1.2 This Standard does not apply to luminaires covered by other standards…

This National Standard of Canada is equivalent to International Standard ISO 14982:1998. 1 Scope This International Standard specifies test methods and acceptance criteria for evaluating the electromagnetic compatibility of tractors and all kinds of mobile (including hand-held) agricultural machinery, forestry machinery, landscaping and gardening machinery [referred to hereafter as…

This National Standard of Canada is equivalent to International Standard ISO 13485:1996. 1 Scope This International Standard specifies, in conjunction with ISO 9001, the quality system requirements for the design/development, production and, when relevant, installation and servicing of medical devices. This International Standard, in conjunction with ISO 9001, is applicable when…

1 Scope 1.1 This Standard specifies the requirements for insulating tubing that is usually round in cross-section and that consists entirely of extruded compounds whose characteristic constituents are thermosetting, elastomeric, or thermoplastic polymers (see Table 1 for materials and ratings). These requirements also cover heat-shrinkable and cross-linked tubing. 1.2 Tubing is…

This National Standard of Canada is equivalent to International Standard ISO/TS 16949:1999 (first edition, 1999-03-01). 1. Scope This Technical Specification specifies, in conjunction with ISO 9001:1994, the quality system requirements for the design/development, production and, when relevant, installation and servicing of automotive-related products. This Technical Specification is…

This National Standard of Canada is based on International Standard CEI/IEC 1264:1994. 1 General 1.1 Scope This standard applies to hollow insulators made of ceramic metarial, with their fixing devices, intended for use with a permanent gas pressure greater than 0,5 bar having an internal volume equal to or greater than 1 litre (1 000 cm³). They are intended for use in electrical…

This National Standard of Canada is based on Standard ANSI/WCMA A100.1-1996. 1. SCOPE & FOREWORD 1.1 The members of the Window Covering Manufacturers Association, Inc. (WCMA), recognizing that unfortunate accidents, including strangulation, have occured among young children using certain products having flexible loops made or imported by members of the industry, have prepared this…

This National Standard of Canada is equivalent to International Standard CEI/IEC 609000: 1987. 1. Scope This standard is applicable to insulating poles (insulating sticks) and tool attachments (fittings) and is divided into three chapters. Chapter I: Specifies the required characteristics for insulating poles with permanently attached fittings and the tests (…