Search

This National Standard of Canada is equivalent to International Standard IEC 60601-2-23:1999, (second edition, 1999-12). 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies requirements for the safety, including essential performance, of TRANSCUTANEOUS PARTIAL PRESSURE MONITORING EQUIPMENT, as defined in 2.…

This National Standard of Canada is equivalent to International Standard IEC 60601-2-30:1999, (second edition, 1999-12). Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies requirements for the safety, including essential performance, of AUTOMATIC CYCLING NON-INVASIVE BLOOD PRESSURE MONITORING EQUIPMENT as…

This part of ISO 10333 specifies requirements, test methods, instructions for use and maintenance, marking, labelling and packaging, as appropriate, for vertical rails and vertical lifelines which incorporate a sliding-type fall arrester. When connected to a full-body harness as specified in ISO 10333-1, vertical rails and vertical lifelines which incorporate a sliding-type fall arrester…

1 Domaine d'application Norme binationale avec UL 514D 1.1 Cette norme vise les plaques-couvercles métalliques et non métalliques pour les dispositifs de câblage en affleurement, garnitures comprises, destinées à être installés conformément au National Electrical Code, NFPA 70, et au Code canadien de l'électricité, Première partie. 1.2 Cette norme vise également les capots de…

1 Scope Bi-national standard, with UL 1565 1.1 This standard applies to those metallic and nonmetallic devices used for positioning - which may include bundling and securing - or to a limited extent supporting cable, wire, conduit, or tubing of a wiring system in electrical installations, to reduce the risk of fire, electric shock, or injury to persons. This standard applies to, but is not…

1.1 Scope 1.1.1 This standard applies to newly produced vented gas fireplace heaters (See Part IV, Definitions), hereinafter referred to as appliances, constructed entirely of new, unused parts and materials: a. For use with natural gas; b. For use with liquified petroleum (propane); c. Direct vent appliances for manufactured home (USA only) or mobile home OEM…

1 Scope 1.1 General This Standard provides requirements for the design and evaluation of building components of fibre-reinforced polymers (FRP) in buildings and of building components reinforced with FRP materials. It is based on limit states design principles and is consistent with the National Building Code of Canada. This Standard does not apply to the design of fibre-reinforced concrete (…

1 Scope 1.1 The requirements of this standard cover molded-case circuit breakers, circuit breaker and ground-fault circuit-interrupters, fused circuit breakers, and accessory high-fault protectors. These circuit breakers are specifically intended to provide service entrance, feeder, and branch circuit protection in accordance with the National Installation Codes in Appendix B, Ref. No.1.…

This standard is divided into five sections, each dealing with a specific example of standardized fuse for use by authorized persons: Section I: Fuses with fuse-links with blade contacts. Section II: Fuses with fuse-links for bolted connections. Section III: Fuses with fuse-links having cylindrical contact caps. Section IV: Fuses with fuse-links with offset blade contacts. Section V: Fuses with…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-1-1:2000. 1 Scope This standard applies to the safety of MEDICAL ELECTRICAL SYSTEMS, as defined in 2.201. It describes the safety requirements necessary to provide protection for the PATIENT, the OPERATOR and surroundings.