Search

1. SCOPE 1.1 These requirements cover external corrosion protection systems on carbon steel underground storage tanks. The requirements are as follows: A Part 1 covers external corrosion protection using sacrificial anodes, electrical isolation and thin film dielectric coating (cathodic protected tank); B Part 2 covers external corrosion protection using dielectric fibre reinforced…

1. SCOPE 1.1 This Standard covers the design and construction of aboveground steel tanks of the non-pressure type, intended for installation inside or outside buildings and for the storage of combustible liquids intended to be used as heating fuel and/or generator fuel. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks intended…

1. DOMAINE D'APPLICATION 1.1 La présente norme porte sur la conception et la fabrication de réservoirs en acier non enterrés et non pressurisés pouvant être installés à l'intérieur ou à l'extérieur de bâtiments et destinés au stockage de liquides combustibles utilisés comme huile de chauffage ou huile pour génératrice. REMARQUE 1 : Ces réservoirs peuvent également servir…

This National Standard of Canada is equivalent to International Standard ISO/TR 10017:2003 (second edition, 2003-05-15). 1 Scope This Technical Report provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance with ISO 9001. This is done by…

This National Standard of Canada is based on International Standard ISO 10535:1998, first edition, 1998-10-15, (with Canadian deviations) 1 Scope This European standard specifies requirements and test methods only for hoists and body support units intended for the transfer of disabled persons as classified in EN ISO 9999:1998: 12 36 03 Wheeled hoists with sling seats 12 36 06 Wheeled hoists…

This National Standard of Canada is equivalent to International Standard ISO 23328-2:2002 (first edition, 2002-10-15). 1 Scope This part of ISO 23328 specifies requirements for non-filtration aspects of breathing system filters (BSF) intended for anaesthetic and respiratory use, and addresses connection ports, leakage, resistance to flow, packaging, marking and information supplied. The test…

This National Standard of Canada is based on International Standard CEI/IEC 60974-5:2002 (first edition, 2002-02). 1 Scope This part of IEC 60974 specifies safety and performance requirements for industrial and professional equipment used in arc welding and allied processes to feed filler wire. The wire feeder may be a stand-alone unit which may be connected to a separate welding power…

This National Standard of Canada is equivalent to International Standard ISO 5007:2003 (second edition, 2003-03-15). 1 Scope This International Standard specifies, in accordance with ISO 10326-1, a laboratory method for measuring and evaluating the effectiveness of the suspension of operator seats on agricultural wheeled tractors. It also specifies acceptance criteria based on the test results…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60079-7:2001 (third edition, 2001-11). 1 Scope This part of IEC 60079 specifies the requirements for the design, construction, testing and marking of electrical apparatus with type of protection increased safety "e" intended for use in explosive gas atmospheres. This standard applies to electrical…

1. SCOPE 1.1 This standard applies to the design, colour, materials, construction and performance requirements of the National Flag of Canada intended for outdoor use. 1.2 The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with…