Low-Pressure Hose Assemblies for use with Medical Gases
This National Standard of Canada is based on International Standard ISO 5359:2000 (second edition, 2000-11-01).
Scope
1.1
This International Standard specifies requirements for low-pressure hose assemblies intended for use with the following medical gases:
- oxygen;
- nitrous oxide;
- air for breathing;
- helium;
- carbon dioxide;
- xenon;
- specified mixtures of the gases listed above;
- air…
Handbook on Infection Control in Office-Based Health Care and Allied Services
This handbook has been developed to answer general questions common to all health care practices and personal services.
- How do I process an instrument after I have used it on a patient or client?
- What kind of disinfectant should I use?
- What kind of sterilizer should I use and do I really need one? - How do I dispose of a contaminated article?
- What should I do with needles and other…
Agricultural Wheeled Tractors - Rear-mounted Three-point Linkage - Part 1: Categories 1, 2, 3 and 4
This National Standard of Canada is based on International Standard ISO 730-1:1994, third edition, 1994-12-15, including Technical Corrigendum 1:1995.
1 Scope
This part of IS0 730 specifies the dimensions and requirements of the three-point linkage for the attachment of implements or equipment to the rear of agricultural wheeled tractors.
It specifies four categories to be used on different…
1 Scope
1.1
This Standard specifies minimum requirements for masonry materials and masonry construction.
Notes:
(1) Requirements for structural design of masonry are specified in CSA S304.1.
(2) If a requirement specified in Part 9 of the National Building Code of Canada differs from a requirement specified
in this Standard, the requirement specified in this Standard should be followed.
1.2…
1 Scope
1.1
This Code applies to
(a) the installation of appliances, equipment, components, and accessories where oil is used for fuel
purposes such as
(i) forced-air furnaces;
(ii) boilers;
(iii) domestic water heaters;
(iv) vehicle heaters; and
(v) emergency power supplies for buildings;
(b) the installation of all stationary and portable oil-burning equipment, including fuel…
Electromagnetic Compatibility (EMC) - Part 2-4: Environment - Compatibility Levels in Industrial Pla...
This National Standard of Canada is equivalent to International Standard CEI/IEC 61000-2-4:2002 (second edition, 2002-06).
1 Scope
This part of IEC 61000 is concerned with conducted disturbances in the frequency range from 0 kHz to 9 kHz. It gives numerical compatibility levels for industrial and non-public power distribution systems at nominal voltages up to 35 kV and a nominal frequency of 50…
Electromagnetic Compatibility (EMC) - Part 2: Environment - Section 6: Assessment of the Emission Le...
This National Standard of Canada is equivalent to International Standard CEI/IEC 1000-2-6:1995 (first edition, 1995-09).
1 Scope
This technical report recommends the procedures to assess the disturbance levels produced by the emission of the devices, equipment and systems installed in non-public networks in industrial environment as far as the low-frequency conducted disturbances in the power…
Sterilization of Health Care Products - Chemical Indicators - Guidance for Selection, Use and Interp...
This National Standard of Canada is equivalent to International Standard ISO 15882:2003 (first edition, 2003-03-15).
1 Scope
This International Standard provides guidance for the selection, use and interpretation of results of chemical indicators used in process definition, validation, and routine monitoring and control of sterilization processes.
This International Standard is…
This is a Tri-National standard, with ANCE NMX-J-162-2004 and UL 98.
1 Scope
1.1
These requirements cover individually enclosed air switches, rated 4000 A or less at 600 V or less, having all current-carrying parts enclosed, manually operable by means of external handles, and intended to be employed in accordance with the national installation codes listed in Appendix B, Ref. No.1.
1.1.1 As…
Identification Cards - Integrated Circuit(s) Cards with Contacts - Part 8: Security Related Interind...
This National Standard of Canada is equivalent to International Standard ISO/IEC 7816-8:1999.
1 Scope
This part of ISO/IEC 7816 specifies: - security protocols for use in cards; - secure messaging extensions; - the mapping of the security mechanisms on to the card(s) security functions/services, including a description of the in-card security mechanisms; - data elements for…
