Search

This National Standard of Canada is based on International Standard IEC 60745-2-4:2002, and is joint with UL 60745-2-4. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to sanders with the exception of all types of disc-type sanders, which are covered by IEC 60745-2-3. Tools covered by this standard include but are not limited to belt sanders…

This National Standard of Canada is equivalent to International Standard IEC 60745-2-5:2003, and is joint with UL 60745-2-5. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to all types of circular saws. Circular saws hereinafter will be referred to as saws. This standard does not apply to saws used with abrasive wheels.

This National Standard of Canada is based on International Standard IEC 60745-2-6:2003, and is joint with UL 60745-2-6. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to hammers. Tools covered by this standard include but are not limited to percussion and rotary hammers.

This National Standard of Canada is equivalent to International Standard IEC 60745-2-8:2003, and is joint with UL 60745-8. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to shears and nibblers.

This National Standard of Canada is based on International Standard IEC 60745-1:2003, and is joint with UL 60745-1. 1 Scope 1.1 This International Standard deals with the safety of hand-held motor-operated or magnetically driven electric tools, the rated voltage of the tools being not more than 250 V for single-phase a.c. or d.c. tools, and 440 V for three-phase a.c. tools. So far as is…

This National Standard of Canada is equivalent to International Standard IEC 60745-2-9:2003, and is joint with UL 60745-2-9. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to tappers.

This National Standard of Canada is based on International Standard IEC 60745-2-11:2003, and is joint with UL 60745-2-11. 1 Scope This clause of Part 1 is applicable, except as follows: 1.1 Addition: This standard applies to reciprocating saws. Tools covered by this standard include but are not limited to jigsaws and reciprocating saws (sabre saws).

This National Standard of Canada is based on International Standard IEC 60745-2-14:2003, and is joint with UL 60745-2-14. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to planers.

This National Standard of Canada is based on International Standard IEC 60745-2-17:2003, and is joint with UL 60745-2-17. 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This standard applies to routers and trimmers.

1 Scope This Standard specifies the requirements for an environmental management system (EMS) for hog operations. This Standard can be applied to hog operations or livestock operations containing hogs. This Standard is intended to be used by hog operations that wish to have their EMS registered by a nationally accredited third-party registration body.