Search

describes the physical requirements for the safe operation of the process analyser measuring system installed in an AH in order to ensure its protection against fire, explosion and health hazards. This standard extends beyond IEC 60079-16 to include houses with Zone 2 interiors and to apply to toxic hazards. (Appropriate national guidelines on toxic hazards are to be followed.)

This National Standard of Canada is equivalent to International Standard CEI/IEC 60743:2001, IDT. 1.1 Scope This International Standard applies to the terminology used to describe tools, equipment, devices and methods used in live working. IEC 60050(651) gives the definitions of all terms used in live working. The present standard permits identification of the tools, equipment and devices and…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60895:2002, IDT. 1 Scope This International Standard is applicable to conductive clothing, either assembled from component parts or forming a single complete clothing, worn by (electrically) skilled persons during live working (especially bare-hand working) at a nominal power system voltage up to 800 kV a.c…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60903:2002, IDT. 1 Scope This International Standard is applicable to: - insulating gloves and mitts which should normally be used in conjunction with leather protector gloves worn over the insulating gloves to provide mechanical protection; - insulating gloves and mitts usable without over-gloves for mechanical…

This CSA Standard is a Tri-National standard, with NMX-J-548-ANCE-2004 and UL 486C. 1 Scope 1.1 This Standard applies to hand- or tool-applied splicing wire and cable connectors intended for use with all alloys of copper or aluminum conductors, or both, in accordance with the Canadian Electrical Code Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in the United States of…

This national Standard of Canada is equivalent to international Standard ISO 10002:2004. 1 Scope This International Standard provides guidance on the process of complaints handling related to products within an organization, including planning, design, operation, maintenance and improvement. The complaints handling process described is suitable for use as one of the processes of an overall…

ISO 10464:2004 specifies the intervals and inspection and testing procedures for the periodic inspection of refillable welded steel dedicated LPG cylinders of water capacity from 0,5 l up to and including 150 l. It applies to cylinders protected by a system to prevent external corrosion and designed and manufactured in accordance with ISO 4706, ISO 22991 or an equivalent design and construction…

1 Domaine d?application 1.1 Cette norme s?applique aux fiches, aux prises, aux entrées d?alimentation et aux connecteurs à contacts cylindriques dont les caractéristiques nominales sont d?au plus 800 A et d?au plus 600 V c.a. ou c.c., et qui peuvent comporter un maximum de deux contacts auxiliaires. Ces dispositifs sont destinés à transmettre le courant à partir de circuits de dérivation, ou à…

This National Standard of Canada is equivalent to International Standard ISO 23328-1:2003, first edition. 1 Scope This part of ISO 23328 gives a short-term airborne sodium chloride particle challenge test method for assessing the filtration performance of breathing system filters (BSF) intended for the filtration of respired gases. This part of ISO 23328 is applicable to BSF used with a…

This National Standard of Canada is equivalent to International Standard ISO 7211/3:1984. 1. Scope and Field of Application This part of ISO 7211 specifies a method for the determination of crimp of yarn in fabric. The method is applicable to most woven fabrics but is unsuitable for fabrics manufactured in such a way as to render removal of the crimp from the yarns impossible or…