Search

This National Standard of Canada is equivalent to International Standard ISO 14971:2007. 1 Scope This International Standard specifies a process for a manufacturer to identify the hazards associated with medical devices, including in vitro diagnostic (IVD) medical devices, to estimate and evaluate the associated risks, to control these risks, and to monitor the effectiveness of the controls…

ISO/TS 10465-1:2007 describes the procedures for underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes. It refers generally to GRP pipes as specified in the system standards ISO 10467 and ISO 10639, but it can also be used as a guide for the installation of other GRP pipes. It does not include jacking, relining or above-ground installations; nor does it cover…

This National Standard of Canada is equivalent to International Standard ISO 500-1:2004. 1 Scope This part of ISO 500 gives general specifications, including speeds, safety requirements, the dimensions for the master shield and clearance zones for rear-mounted power take-offs (PTOs) of types 1, 2 and 3 on agricultural tractors with a track setting of more than 1 150 mm (those with a track…

This National Standard of Canada is equivalent to International Standard ISO 500-2:2004. 1 Scope This part of ISO 500 specifies the dimensions of the master shield and clearance zones for rear-mounted power take-offs (PTO) of types 1 and 2 on narrow-track (track width 1 150 mm or less) agricultural tractors. *********************************** ISO 500-2:2004 endorsed standard replaces this…

This National Standard of Canada is equivalent to International Standard ISO 500-3:2004. 1 Scope This part of ISO 500 specifies manufacturing requirements for, and the location of, rear-mounted power takeoffs (PTOs) of types 1, 2 and 3 on agricultural tractors. ************************************************************ ISO 500-3:2004 endorsed standard replaces this standard.

This National Standard of Canada is equivalent to International Standard ISO 5673-1:2005. 1 Scope This part of ISO 5673 specifies the power take-off (PTO) drive shafts of a tractor or self-propelled machine used in agriculture and the power-input connection (PIC) of its implement, establishing a method for determining PTO static and dynamic torsional strength while giving manufacturing and…

This National Standard of Canada is equivalent to International Standard ISO 5673-2:2005. 1 Scope This part of ISO 5673 gives the forms and applications of power take-off (PTO) drive shafts for tractors and self-propelled machines used in agriculture, and specifies the dimensions for, and clearance zone around, the implement power-input connection (PIC) for a variety of attachments. Its…

This National Standard of Canada is equivalent to International Standard ISO 6489-3:2004. 1 Scope This part of ISO 6489 specifies the dimensional requirements and location for category 0, 1, 2, 3, 4 and 5 drawbars mounted on the rear of agricultural tractors. ********************************************************************** Endorsed standard ISO 6489-3:2004 replaces this standard

ISO 22965-1:2007 applies to concrete for structures cast in situ, pre-cast structures and structural pre-cast products for buildings and civil engineering structures. The concrete can be mixed on site, ready-mixed concrete or produced in a plant for pre-cast concrete products. ISO 22965-1:2007 applies to concrete compacted to retain no appreciable amount of entrapped air other than entrained air…

1.1 Scope 1.1.1 This standard applies to newly produced gas food service equipment providing coverage for ranges and unit broilers, baking and roasting ovens, counter appliances, deep fat fryers, kettles, steam cookers, steam generators, (see Part IV, Definitions) hereinafter referred to as either (1) "appliances", constructed entirely of new, unused parts and materials for use in food…