Search

This National Standard of Canada is equivalent to International Standard ISO/OECD 789-10:2006. 1 Scope ISO/OECD 789-10 specifies tests for determining the hydraulic pressure at the external hydraulic service of an agricultural tractor/implement as specified in ISO 10448, as well as companion tests for measuring the maximum hydraulic power available.

This National Standard of Canada is equivalent to International Standard IEC 61400-11:2002+A1:2006. 1 Scope This part of IEC 61400 presents measurement procedures that enable noise emissions of a wind turbine to be characterised. This involves using measurement methods appropriate to noise emission assessment at locations close to the machine, in order to avoid errors due to sound propagation,…

This National Standard of Canada is equivalent to International Standard IEC 61400-12-1:2007. 1 Scope This part of IEC 61400 specifies a procedure for measuring the power performance characteristics of a single wind turbine and applies to the testing of wind turbines of all types and sizes connected to the electrical power network. In addition, this standard describes a procedure to be used to…

This National Standard of Canada is equivalent to International Standard ISO 14184-1:1998. 1 Scope This Part of ISO 14184 specifies a method for determining the amount of free formaldehyde and formaldehyde extracted partly through hydrolysis by means of a water extraction method. The method can be applied to the testing of textile samples in any form. The procedure is intended for use in the…

This National Standard of Canada is equivalent to International Standard ISO 14184-2:1998. 1 Scope This standard specifies a method for determining the amount of formaldehyde released under the conditions of accelerated storage from textiles in any form by means of a vapour absorption method. The procedure is intended for use in the range of releasable formaldehyde on the fabric between 20 mg/…

This National Standard of Canada is equivalent to International Standard ISO 19903:2006. 1 Scope This International Standard specifies requirements and provides recommendations applicable to fixed concrete offshore structures for the petroleum and natural gas industries, and specifically addresses a) the design, construction, transportation and installation of new structures, including…

1. SCOPE 1.1 These requirements apply to materials for the fabrication of air duct systems for use in accordance with the requirements of the current edition of the National Building Code. The materials covered by these requirements include preformed lengths of flexible or rigid ducts, materials in the form of boards for field fabrication of lengths of rigid ducts, and preformed flexible…

ISO 21930:2007 provides the principles and requirements for type III environmental declarations (EPD) of building products. ISO 21930:2007 contains specifications and requirements for the EPD of building products. Where this International Standard contains more specific requirements, it complements ISO 14025 for the EPD of building products. ISO 21930:2007 provides a framework for and the basic…

1. SCOPE 1.1 This Standard covers the design and construction of aboveground steel non- pressure tanks intended for installation inside or outside buildings and for the storage of: A Combustible liquid intended to be used as heating fuel and/or generator fuel; and B Lubricating oil. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks…

1. DOMAINE D'APPLICATION 1.1 La présente norme porte sur la conception et la construction de réservoirs non pressurisés non enterrés en acier destinés à être installés à l'intérieur ou à l'extérieur de bâtiments et au stockage de : A Liquide combustible destiné à être utilisé comme huile de chauffage ou huile pour génératrice; B Huile lubrifiante. REMARQUE 1 : Ces…