Search

Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of stationary electric cooking ranges, hobs, ovens and similar appliances for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 480 V for other appliances. NOTE 101 Examples of appliances that are…

Scope 1.1.1 Equipment Covered by This Code This Code covers the design, construction, operation, inspection, testing, maintenance, alteration, and repair of the following equipment and its associated parts, rooms, spaces, and hoistways, where located in or adjacent to a building or structure (see 1.2): (a) hoisting and lowering mechanisms, equipped with a car, that move between two or…

Scope 1.1 This standard applies to pin and sleeve type plugs, receptacles, power inlets, and connectors, rated up to 800 amperes and up to 600 volts ac or dc, and which may include up to eight pilot contacts. These devices are intended to provide power from branch circuits, or are for direct connection to the branch circuit in accordance with the Canadian Electrical Code Part I (CEC), C22.1, and…

ISO 16346:2013 defines the general procedures to assess the energy performance of buildings, including technical building systems, and defines the different types of ratings, and the building boundaries. The purpose of ISO 16346:2013 is to a) collate results from other International Standards that calculate energy use for specific services within a building, b) account for energy generated…

1 Scope This National Standard of Canada applies to automotive fuel composed of 50 to 85% by volume denatured fuel ethanol and gasoline strictly for use in flexible fuel vehicles over a wide range of climatic conditions. Fuel produced to this standard is not for use in conventional vehicles designed to operate on gasoline containing up to 10% by volume ethanol. Precautions for the use of…

Scope 1.1 This standard applies to newly produced type 2 clothes dryers (see Clause 3) hereinafter referred to as dryers, constructed entirely of new, unused parts and materials: a) for use with natural gas; b) for use with manufactured gas; c) for use with mixed gas; d) for use with propane gas; e) for use with liquefied petroleum gases; and f) for use with LP gas-air mixtures. The construction…

ISO 13033:2013 establishes the means to derive seismic actions on nonstructural components and systems (NSCS) supported by or attached to new or existing buildings. It also provides procedures for the verification of NSCS seismic capacities. NSCS include architectural elements, mechanical and electrical systems, and building contents. ISO 13033:2013 is not a legally binding and enforceable code.…

ISO 9162:2013 specifies required characteristics and additional information to be supplied to the purchaser by the vendor of those products commonly referred to as liquefied petroleum gases (see ISO 8216‑3) and is intended to apply to international transfers of commercial propane and commercial butane. ISO 9162:2013 is neither intended nor expected to replace or encroach upon national standards…

ISO/TS 15638-9:2013 addresses the provision of Remote Tachograph Monitoring and specifies the form and content of such data required to support such systems, and access methods to that data. ISO/TS 15638-9:2013 provides specifications for common communications and data exchange aspects of the application service remote tachograph monitoring that a regulator may elect to require or support as an…

ISO/TS 15638-10:2013 addresses the provision of Emergency messaging system/eCall and specifies the form and content of such data required to support such systems, and access methods to that data. ISO/TS 15638-10:2013 provides specifications for common communications and data exchange aspects of the application service Emergency Messaging System/eCall that a regulator may elect to require or…