Search

IEC 60335-2-90:2015 deals with<br /> - the safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances;<br /> - the safety of combination microwave ovens with a cavity door, the requirements for which are contained in Annex AA;…

IEC 60335-2-90:2015 deals with - the safety of microwave ovens with a cavity door intended for commercial use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances; - the safety of combination microwave ovens with a cavity door, the requirements for which are contained in Annex AA; - the safety of…

IEC 62317-13:2015 specifies the dimensions that are of importance for mechanical interchangeability for a preferred range of PQ-cores and low-profile PQI-cores made of ferrite, and the locations of their terminal pins on a 2,54 mm printed wiring grid in relation to the base outlines of the cores. The selection of core sizes for this standard is based on the philosophy of including those sizes…

ISO/IEC 19785-1:2015 defines structures and data elements for biometric information records (BIRs). ISO/IEC 19785-1:2015 defines the concept of a domain of use to establish the applicability of a standard or specification that complies with CBEFF requirements. ISO/IEC 19785-1:2015 defines the concept of a CBEFF patron format, which is a published BIR format specification that complies with CBEFF…

ISO/IEC 19785-1:2015 defines structures and data elements for biometric information records (BIRs). ISO/IEC 19785-1:2015 defines the concept of a domain of use to establish the applicability of a standard or specification that complies with CBEFF requirements. ISO/IEC 19785-1:2015 defines the concept of a CBEFF patron format, which is a published BIR format specification that complies with CBEFF…

1.1 This fire test method is applicable to door assemblies (comprising doors, frame products, hardware, glazing materials, and other parts, accessories or components) of various materials and types of construction, for use as closures in openings in walls and partitions that are fire separations in accordance to the National Building Code of Canada. 1.1.1 This test method is also applicable…

1.1 This fire test method is applicable to window and glass block assemblies and other light transmitting assemblies, for use as closures in openings in walls and partitions that are fire separations in accordance to the National Building Code of Canada. 1.2 It is the intent that the tests made in conformity with this Standard will develop data to enable regulatory bodies to determine the…

1.1 This Standard applies to newly produced non-metallic dip tubes intended for use in water heaters. 1.2 Compliance of a dip tube with this Standard does not imply that such dip tube is acceptable for use in water heaters without supplemental tests with the dip tube installed in the particular water heater design. 1.3 This standard contains SI (Metric) corresponding to the yard/pound…

1.1 This Standard applies to newly produced thermoplastic hose, hose couplings, and complete assemblies of hose and couplings used to conduct natural gas in a gaseous state and propane in either a liquid or gaseous state to be used at temperatures between -40°F (-40 °C) and 140°F (60 °C). 1.2 Hose assemblies covered in this Standard are installed in accordance with the appliance and/or the…

ISO 21214:2015 determines the air interface using infrared systems at 820 nm to 1 010 nm. The International Standard provides protocols and parameters for medium range and medium to high speed wireless communications in the ITS sector using infrared systems. Such links are required for quasi-continuous, prolonged, or short communications between the following: - vehicles and the roadside…