Search

ISO 7218:2007 gives general requirements and guidance/options intended for three main uses: implementation of ISO TC34/SC9 or TC34/SC5 standards for detection or enumeration of microorganisms;good laboratory practices for food microbiological laboratories (the purpose is not to detail them in this International Standard, manuals are available for that purpose);guidance for accreditation of food…

ISO 15614-7:2007 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests. ISO 15614-7:2007 defines the conditions for carrying out welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed in Clause 8. Additional tests may be required by…

The purpose of this technical specification is to establish standard methods for a qualitative check of the performance of ultrasound physiotherapy devices during their lifetime, and to provide guidance on calibration requirements and techniques. To ensure that the ultrasound physiotherapy equipment is in an appropriate condition for use, a regular quality check is necessary. This technical…

This National Standard of Canada is equivalent to International Standard ISO/TS 14798:2006. 1 Scope This Technical Specification establishes general principles and specific procedures for assessing risk. The purpose of this Technical Specification is to provide a process for making decisions relevant to the safety of lifts during the . design, construction, and installation of lifts, lift…

This National Standard of Canada is equivalent to International Standard ISO/TS 22559-1:2004. 1 Scope 1.1 This part of ISO/TS 22559 - specifies global essential safety requirements (GESRs) for lifts (elevators), their components and functions, and - establishes a system and provides methods for minimizing safety risks that may arise in the course of, the operation and use of, or work on, lifts…

IEC 60684-3-211:2007 gives the requirements for four types of semi-rigid, heat-shrinkable polyolefin sleeving with a nominal shrink ratio of 2:1 that has been found suitable for temperatures up to 135 °C. Type A: general purpose, flame-retarded, opaque colours; Type B: general purpose, non flame-retarded, translucent; Type C: fluid resistant, flame-retarded, opaque colours; Type D: fluid…

IEC 60684-3-246:2007 defines requirements for dual wall, non-flame retarded, heat shrinkable, polyolefin sleeving. This sleeving has been found suitable for use up to 110 °C. The sleeving consists of an outer layer made of a semi-rigid cross-linked material. The inner layer is a substantially non-cross-linked polyolefin that flows and fuses during the shrinkage process to provide a seal. The…

IEC 60684-3-246:2007 defines requirements for dual wall, non-flame retarded, heat shrinkable, polyolefin sleeving. This sleeving has been found suitable for use up to 110 °C. The sleeving consists of an outer layer made of a semi-rigid cross-linked material. The inner layer is a substantially non-cross-linked polyolefin that flows and fuses during the shrinkage process to provide a seal. The…

IEC 60684-3-211:2007 gives the requirements for four types of semi-rigid, heat-shrinkable polyolefin sleeving with a nominal shrink ratio of 2:1 that has been found suitable for temperatures up to 135 °C.<br /> Type A: general purpose, flame-retarded, opaque colours;<br /> Type B: general purpose, non flame-retarded, translucent;<br /> Type C: fluid resistant, flame-retarded,…

This National Standard of Canada is equivalent to International Standard ISO/TS 21091:2005. 1 Scope This Technical Specification defines minimal specifications for directory services for health care using the X.500 framework. This Technical Specification provides the common directory information and services needed to support the secure exchange of health care information over public…