Search

1.1 Scope 1.1.1 This standard applies to newly produced, gas-fired low-intensity infrared heaters and infrared radiant tube heaters (see Part IV, Definitions), hereinafter referred to as heaters or appliances, constructed entirely of new, unused parts and materials with inputs up to and including 400 000 Btu/hr (117.23 kW) per burner: a. For use with natural gas; b. For use with…

1.1 Scope 1.1.1 This standard applies to newly produced, direct gas-fired process air heaters of the recirculating or non-recirculating type, (See Definition), hereinafter referred to as heaters, whose primary purpose is to provide process heating to non-occupied spaces within commercial and industrial buildings and may also include operation as a non-recirculating ventilation air heater, (See…

Preface This is the harmonized ANCE, CSA, and UL Standard for Thermoplastic-Insulated Wires and Cables. It is the fourth edition of NMX-J-010-ANCE, the ninth edition of CSA-C22.2 No. 75, and the fourteenth edition of UL 83. This edition of CSA-C22.2 No. 75 supersedes the previous edition published in 2003. This edition of UL 83 supersedes the previous edition published in 2003. 1 Scope 1.1…

This National Standard of Canada is equivalent to International Standard ISO 10003:2007. 1 Scope This International Standard provides guidance for an organization to plan, design, develop, operate, maintain and improve an effective and efficient dispute-resolution process for complaints that have not been resolved by the organization. This International Standard is applicable to: -…

This National Standard of Canada is based on International Standard IEC 60601-1:2005. 1.1 * Scope This International Standard applies to the BASIC SAFETY and ESSENTIAL PERFORMANCE of MEDICAL ELECTRICAL EQUIPMENT and MEDICAL ELECTRICAL SYSTEMS, hereafter referred to as ME EQUIPMENT and ME SYSTEMS. If a clause or subclause is specifically intended to be applicable to ME EQUIPMENT only, or to ME…

This National Standard of Canada is equivalent to International Standard CEI/IEC 60601-2-2:2006. 1 Scope and object This clause of the General Standard applies except as follows: *1.1 Scope Addition: This Particular Standard specifies requirements for the safety of HIGH FREQUENCY SURGICAL EQUIPMENT and HF SURGICAL ACCESSORIES used in medical practice, as defined in 2.1.110 and…

This National Standard of Canada is based on International Standard CEI/IEC 60691:2002+Amendment 1:2006. 1 Scope and object This International Standard is applicable to thermal-links intended for incorporation in electrical appliances, electronic equipment and component parts thereof, normally intended for use indoors, in order to protect them against excessive temperatures under abnormal…

This National Standard of Canada is identical to International Standard ISO 22198:2006. 1 Scope This International Standard specifies a method for the determination of length and width of textile fabrics that are in a tension-free relaxed state. The test is applicable to textile fabrics of full width, folded lengthwise down the middle, or in tubular form, but no longer than 100 m. This…

This National Standard of Canada is based on International Standard ISO 10651-4:2002. 1 Scope This European Standard specifies requirements for operator-powered resuscitators intended for use with all age groups and which are portable and intended to provide lung ventilation to individuals whose breathing is inadequate. Operator-powered resuscitators for infants and children are designated…

This National Standard of Canada is based on International Standard ISO 10651-5:2006. 1 Scope This part of ISO 10651 specifies the basic safety and essential performance requirements for gas-powered emergency resuscitators (3.10) intended for use with humans by first responders. This equipment is intended for emergency field use and is intended to be continuously operator attended in normal use…