Search

1 Scope 1.1 These requirements cover rating, and performance during fire tests, of fire extinguishers intended for use in attacking Class A, B, C, D, and K fires as defined herein. These requirements also cover performance during fire tests of fire extinguishing agents for application on Class D fires. The ultimate rating of an extinguisher or the prescribed use of an extinguisher or fire…

1 Domaine d'application "Cette norme vise la classification et l’efficacité au cours des essais sur foyers -types des extincteurs destinés à être utilisés pour combattre les feux de classes A, B, C, D et K définis cidessous. Elle vise également l’efficacité au cours des essais sur foyers-types des agents extincteurs destinés à être utilisés pour combattre les feux de classe D. La…

1 Scope 1.1 The requirements of this Standard apply to manually operated, general-use snap switches for connection to copper (Cu) or copper-clad conductors used in accordance with the National Electrical Code(NEC), ANSI/NFPA 70, or the Canadian Electrical Code (CE Code), Part I, and and intended to be permanently connected in accordance with the NEC and the CE Code, Part I. In Canada,…

1 SCOPE 1.1 These requirements cover factory-built fireplace systems capable of utilizing solid fuels, as specified by the manufacturer, and intended for provision of supplementary heating in buildings. These fireplace systems include a fire chamber assembly, chimney sections, a roof assembly, and other associated parts. 1.2 These factory-built fireplace systems are not for use with masonry…

This standard applies to the design, colour, materials, construction and performance requirements of the National flag of Canada intended for outdoor use. The testing and evaluation of a product against this standard may require the use of materials and equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its use. Anyone using…

This standard applies to the design, colour, materials, construction and performance requirements of the National flag of Canada intended for indoor use. The testing and evaluation of a product against this standard may require the use of materials and equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its use. Anyone using this…

This National Standard of Canada applies to the design, colours, and performance of the National Flag of Canada intended for one-event-only use. The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This standard does not purport to address all the safety aspects associated with its use. Anyone using this…

1.1 General This standard specifies the requirements for flexible cords, elevator cables, and hoistway cables rated 600 V maximum and electric vehicle cables rated 1000 V maximum and intended for use in accordance with CAN/CSA C22.1, Canadian Electrical Code, Part I, in Canada, NOM-001-SEDE, La Norma de Instalaciones Electricas, in Mexico, and NFPA 70, National Electrical Code (NEC), in the…

1 SCOPE 1.1 The purpose of the test is to evaluate the temperature transmission performance of a protective covering over foamed plastic when the assembly is subjected to a standard fire exposure condition following the Standard Time-Temperature Curve as described in Section 5, Test Conditions. NOTE: In the National Building Code of Canada, these protective coverings are commonly referred as…

1 SCOPE 1.1 This test method is applicable to materials employed in light diffusers and lenses. 1.2 The testing procedure described in this Standard is intended to assess the propensity of material employed in light diffusers and lenses to fall from its installed position before igniting when subjected to test fire exposure conditions in CAN/ULC-S102, Standard Method of Test for Surface…