Search

This National Standard of Canada is based on Draft International Standard ISO/DIS 11193:2000. 1 Scope This National Standard specifies requirements for packaged sterile, or bulked non-sterile, rubber gloves intended for use in medical examinations and diagnostic or therapeutic procedures to protect the patient and the user from cross-contamination. It also covers rubber gloves intended…

This National Standard of Canada is equivalent to International Standard ISO 13485:2003 (second edition, 2003-07-15). 1.1 General This International Standard specifies requirements for a quality management system where an organization needs to demonstrate its ability to provide medical devices and related services that consistently meet customer requirements and regulatory requirements…

This National Standard of Canada is a joint Standard with UL 60950-21. It is based on International Standard IEC 60950-21 (first edition, 2002). 1 Scope This part of IEC 60950 applies to information technology equipment intended to supply and receive operating power via a TELECOMMUNICATION NETWORK, where the voltage exceeds the limits for TNV CIRCUITS.

This CSA Standard is a common standard with UL 486A-486B, first edition, and NMX-J-543-ANCE-03, first edition. 1 Scope 1.1 This Standard applies to connectors for use with all alloys of copper or aluminum conductors, or both, for providing contacts between current-carrying parts, in accordance with the Canadian Electrical Code, Part I, C22.1, in Canada, the National Electrical Code, NFPA-70, in…

This CSA Standard is a common Standard with UL 83, thirteenth edition, and NMX-J-010-ANCE-2003, third edition. 1 Scope 1.1 This Standard specifies the requirements for 600 V, single-conductor, thermoplastic-insulated wires and cables, for use as follows: a) in Canada, in accordance with CSA C22.1, Canadian Electrical Code (CEC), Part I; b) in Mexico, in accordance with NOM-001-SEDE,…

This National Standard of canada is based on International Standard CEI/IEC 1089:1991 (first edition, 1991-05). 1 Scope [Replace this clause with the following] 1.1 This Standard specifies the electrical and mechanical characteristics of round wire concentric lay overhead electrical stranded conductors made of combinations of any of the following metal wires: (a) aluminum wires: (i)…

1.1 Scope 1.1.1 This standard applies to automatically operating gas-fired central furnaces (see Part XI, Definitions), hereinafter referred to as furnaces, for installation in residential, commercial, and industrial structures including furnaces for Direct Vent, Recreational Vehicle, Outdoor, and Manufactured (Mobile) Homes. These furnaces may include a cooling unit. All units shall be…

1. SCOPE 1.1 This Standard covers the design and construction of aboveground steel tanks of the non-pressure type, intended for installation inside or outside buildings and for the storage of combustible liquids intended to be used as heating fuel and/or generator fuel. NOTE 1: These tanks may also be used for the storage of used oil as a heating and/or generator fuel. For tanks intended…

1. DOMAINE D'APPLICATION 1.1 La présente norme porte sur la conception et la fabrication de réservoirs en acier non enterrés et non pressurisés pouvant être installés à l'intérieur ou à l'extérieur de bâtiments et destinés au stockage de liquides combustibles utilisés comme huile de chauffage ou huile pour génératrice. REMARQUE 1 : Ces réservoirs peuvent également servir…

This National Standard of Canada is equivalent to International Standard ISO/TR 10017:2003 (second edition, 2003-05-15). 1 Scope This Technical Report provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance with ISO 9001. This is done by…